Skip to content

Vertere Sabre High-End Moving Magnet Phono Cartridge

by Vertere
UPC:
$1,199.00

SKU VertereSabreMM
RETURN POLICY
  • NO RETURNS ON ALL PHONO CARTRIDGE PURCHASES
  • Vertere Sabre High-End Moving Magnet Phono Cartridge

    Vertere Hi-End Moving Magnet Phono Cartridge

    Sabre is a Hi-End Moving Magnet Phono Cartridge designed and hand-crafted to exacting standards at Vertere in the UK to ensure an uncompromised musical experience.

    Sit back, relax and enjoy the music Sabre brings ...

    Precision Machined Sabre Cartridges
    Sabre’s body is precision machined from solid Aluminum alloy with its final mass perfectly tuned to the generator for ideal support and control of unwanted mechanical vibrations.

    In turn, the generator is uniquely fixed to the body via four ‘spike’ screws that are precisely positioned and torqued for maximum rigidity and performance.

    Cartridge mounting is via two machined threaded fixing holes. Also supplied with the cartridge are two Vertere stainless steel thumb screws designed to ensure correct coupling of the cartridge body to the tonearm head-shell.

    Sabre cartridge to the tonearm
    Three specially designed contact areas machined on top of the cartridge body provide the exact mechanical coupling that is required by the Sabre cartridge to the tonearm.

    In addition, there is a ridge machined on the top front of the Sabre to assist with the alignment of the cartridge when mounting onto any Vertere tonearm.

    Sabre utilizes an Alnico magnet providing long-term stable magnetism and strong magnetic field to size ratio.

    Each Sabre‘s cantilever/suspension is individually positioned and aligned at Vertere to ensure maximum musical performance.

    The Elliptical diamond stylus tip is rigidly fixed and bonded to an aluminum tube cantilever designed for maximum tracking ability without compromising on high frequency response or low surface noise.

    Sabre has an extended response of below 15Hz to over 25kHz which when coupled with its low mass moving magnet and an output of 4.0mV creates a lifelike dynamic range and scale with incredible detail, low frequency ‘punch’, depth and precision.

    Specs

    Frequency Response
    15 Hz -25 kHz

    Channel Separation
    Minimum 22 dB

    Output Level
    4.0mV (1kHz, 5cm/sec.)

    Recommended Phono Input load
    47 kΩ
     100 pF – 220 pF

    Recommended Tracking Weight
    2.0 g (1.9 g - 2.1 g)

    Frequency response
    15 Hz -25 kHz

    Channel separation
    Minimum 22 dB

    Cantilever
    Aluminium Alloy Tube


    Stylus
    Elliptical Diamond
    7.5 x 15.5 μm

    Mounting
    Special Tri-Point contact with M2.5 Threaded Fixing Holes

    Generator Fixing
    Special Quad-Point Contact with M2.5 Stainless ‘Spike’ Screws

    Dynamic Compliance
    10 x 10-⁶ cm/dyne

    Coil Resistance
    1 kΩ (per Channel)

    Recommended Load Capacitance
    100 – 200pF

    Weight
    10.3 g

    Dimensions
    17.3 (H) x 17.0 (W) x 28.2 (L) mm