Skip to content

Ortofon 2MR Black Moving Magnet Phono Cartridge for Rega Turntables

by Ortofon
UPC: 5705796080537
$695.00

SKU 2MRBlack

Product Qualifies for FREE Ground Shipping

RETURN POLICY
  • NO RETURNS ON ALL PHONO CARTRIDGE PURCHASES
  • Ortofon 2MR Black Moving Magnet Phono Cartridge for Rega Turntables

    Presenting the Ortofon 2MR cartridges
    Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.
    Authentic sound reproduction
    2MR continues the 2M Series' commitment to authentic sound reproduction. A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy. This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.
    More than just a cartridge
    2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
    2MR cartridge key features
    • Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
    • High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
    • 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
    • Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
    • Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

    Specs
    Output voltage at 1000 Hz, 5cm/sec. - 5 mV
    Channel balance at 1 kHz - 1 dB
    Channel separation at 1 kHz - 26 dB
    Channel separation at 15 kHz - 15 dB
    Frequency response - 20-20.000 + 2 / - 0 dB
    Tracking ability at 315Hz at recommended tracking force - 80 µm
    Compliance, dynamic, lateral - 22 µm/mN
    Stylus type - Nude Shibata
    Stylus tip radius - r/R 6/50 µm
    Tracking force range - 1.4-1.7 g (14-17 mN)
    Tracking force, recommended - 1.5 g (15 mN)
    Tracking angle - 20°
    Internal impedance, DC resistance - 1.2 kOhm
    Internal inductance - 630 mH
    Recommended load resistance - 47 kOhm
    Recommended load capacitance - 150-300 pF
    Cartridge colour, body/stylus - Black/Black
    2MR cartridge weight - 6 g
    2M and 2M Verso cartridges weight - 7.2 g
    2M Premounted cartridge weight - 16.7 g

    Replacement stylus unit - 2M Black (interchangeable with 2M Bronze and 2M Black LVB 250)