Legacy Audio i·V 4 Ultra Dedicated Module Four Channel Power Amplifier

Legacy Audio i·V 4 Ultra Dedicated Module Four Channel Power Amplifier

Legacy's i·V4 Ultra offers a dedicated module for each of its four channels. The amplifier approaches 80% efficiency while delivering 610 watts per channel into 8 ohms, 1,000 watts into 4 ohms.

Featuring state of the art ICEedge® technology, the elegant i·V4 Ultra amplifier approaches 80% efficiency while delivering 610 watts per channel into 8 ohms, 1,000 watts into 4 ohms. Such exceptional power is the product of very high current (i) and voltage (V) output capabilities providing stability into low impedances with a peak output current capability of 38A.

i·V 4 Ultra Features:

• Short circuit protection
• Thermal protection
• Triggered On/Off
• Standby switch
• Front panel status indicator

Say goodbye to excessive heat and transformer hum. The crystal-clear sound is virtually noise-free and reliability is assured- after all, it’s a Legacy.

The Legacy i·V series is available in a monoblock up to an eight channel configuration.

Specs

Power Rating:
1000 watts per channel x 4 @ 4 ohms, all channels driven 610 watts per channel x 4 @ 8 ohms, all channels driven
Peak Power:
1.2 kW peak power from any channel @ 4 Ohm/1kHz with less than 1% distortion
Over Current Protection:
Breaker reset for excessive sustained current
Inputs:
Fully balanced XLR, single-end RCA
Outputs:
Gold plated safety approved five-way binding posts
Damping factor:
750 average, 20Hz to 1kHz
Voltage Gain:
25.8 dB
Dynamic Range:
127dB, A- weighted
Voltage/Current:
98 Vp / 38Ap
Input Sensitivity:
5.0Vp @ 1200W/4 Ohm
Input Impedance:
38 kOhm for both pin 2+ and pin 3-
Channel Separation:
120 dB at 1kHz
Unit Dimensions:
17.5" W x 15.6" D x 5.8" H
Unit Shipping Weight:
38 lbs
Notes:
Highest power output can be obtained using a single 230V, 20A line. AC cord is provided.