Octave Phono Module Preamplifier

by Octave
UPC:
Call for Availability
$4,400.00

SKU PhonoModuleBlack

Product Qualifies for FREE Ground Shipping

Octave Phono Module Preamplifier

Tube based external phono preamplifiers are the preference of music lovers who prefer the sonic virtues of analogue reproduction. Modern MC (moving coil) pickup systems, with their low output signal, cannot be connected to a tube based phono stage without an additional step up transformer to keep the total noise to an acceptable level.

When OCTAVE was founded, Andreas Hofmann began developing phonostage preamplifiers with an electronic MC input, because transformers are very sensitive to magnetic stray fields and they are limited in respect of the load impedance and the amplification factor. The OCTAVE Phono Module is a full feature phone preamplifier which allows the use of three different Input modules and three different Output modules.

The three Input modules can be used simultaneously. An single-ended (RCA) MM (moving magnet) module, with switchable Input Impedance 1k Ohm and 47k Ohm. An single-ended (RCA) MC module featuring switchable Input Impedance between 50 to 1k Ohm, with Gain adjustable in two steps.
It can be selected from a plurality of input modules. Not only phono, but also line modules available.

There is a balanced MC Module with XLR input jacks, featuring the same Impedance and Gain adjustment as in the unbalanced MC module. The Phono RIAA equalization stage is realized with a tube circuit based on the phono section of the highly-regarded OCTAVE HP 500 SE preamplifier. The RIAA Stage utilizes three tubes to ensure the high gain required by the RIAA correction.The specific configuration, with solid-state devices in the MC input and tubes in the RIAA output stage, allows the realization of a phono preamplifier which surpasses any and all tube designs in respect to spectral clarity and the signal to noise ratio.

The optional Output modules complete the OCTAVE Phono Module: There is the standard single-ended Output Module featuring dual RCA outputs, one with fixed level, the other with passive regulation. The next is the single-ended “ Direct Drive “ Module, also with dual RCA outputs, where the regulated output is buffered to reach a low output resistance to allow for driving a power amplifier directly.

There is also the Balanced (XLR) “Direct Drive” Module, featuring complex circuitry containing a tube and some integrated circuits that form a perfect balanced converter. This regulated output is also able to drive any power amplifier directly, while also allowing the level of the balanced output to be reduced to operate with the balanced line level inputs of a preamplifier. The OCTAVE Phono Module utilizes an external power supply.

Basic Model           Phono Module
Tube Complement           
1 x ECC83, 1 x ECC81
Options           

Active Regulated Outputs, XLR Output, Design           
Aluminium silver or Aluminium black
Specs

Regulated Standard Outputs                 


      Signal-to-Noise Ratio           - 100 dB     

      Output Impedance           240 Ohm (Cinch)     

      Max. Output Level           7 V RMS     

      Distortion           less than 0.01%     
      Gain           0dB     

      Regulated Active Outputs                 

      Signal-to-Noise Ratio           - 100 dB     

      Output Impedance           240 Ohm (Cinch/ XLR)     

      Max. Output Level           7 V RMS     

      Distortion           less than 0.01%     
      Gain Low / High           0dB / 15dB     

      Phono-Section                 

      Gain MM - Fixed Output           38 dB
    

      Gain MC - Fixed Output Low / High           58 dB / 65 dB
    

      Phono MC                 

      Input Impedance           50 - 1k Ohm
    
      Signal-to-Noise Ratio RCA           -69 dB / - 75 dB     
      Signal-to-Noise Ratio XLR           -72 dB / - 78 dB     

      Corner Frequency Subsonic-Filter           20 Hz / - 3 dB     

      Phono-MM                 

      Input Impedance           1k + 47kOhm
    
      Signal-to-Noise Ratio RCA           - 77 dB     

      Corner Frequency Subsonic-Filter           20 Hz / - 3 dB     

General Facts                 

      Power Consumption           25 - 35 W
    
      Weight Preamp           9 - 12,5 kg     

      Weight Power Supply           4 kg     

      Dimensions           437 x 80 x 390 mm (W x H x D)     
      Dimensions Power Supply           100 x 77 x 230 mm (W x H x D)     

      Standard Accessories           Power cord     

    California customers: Please click here for your Proposition 65 warning.

    You recently viewed

    Clear recently viewed