Mobile Receivers
Mobile Amplifiers
Mobile Speakers
Mobile Subwoofers
Mobile Dash Cameras
Blind Spot Monitoring
Heated Seats
Loaded Enclosures
Empty Enclosures
Mobile Lighting
Marine Radios
Marine Amplifiers
Marine Speakers
Remote Starters
Mobile Lighting
Motorcycle/Powersports Speaker Kits
Floorstanding Speakers
Bookshelf Speakers
Center Channel Speakers
Surround Speakers
In-Wall Speakers
In-Ceiling Speakers
Subwoofers
Sound Bars
Powered Speakers
Surround Sound Systems
Outdoor Speakers
A/V Receivers
Stereo Receivers
A/V Preamp/Processors
Integrated Amplifiers
Power Amplifiers
Preamplifiers
Click to open expanded view
No Radio Flash Required
This amplifier is tuned for the best performance with a stock Harley Davidson® or aftermarket radio.
Input Sensitivity Setting
The input sensitivity adjustment exists to be able to properly level match an aftermarket receiver’s output if the OEM Harley Davidson® radio has been replaced (otherwise, we would have just removed and pre-set it!).
With an OEM Harley Davidson® radio, the input sensitivity should be set at just past the halfway point for optimal sound as shown in the picture above.
**Note** With this setting, the OEM Harley Davidson® radio can be turned up to 3 “clicks” from its max volume before the radio begins to distort.
Bypass Port For System Expansion
Easily add additional amplifiers by connecting to the input/bypass harness.
Built-in Voltage Monitoring Circuit
Automatically turns off the amplifier when the battery voltage drops below 10.5V
BIKE FITMENT
2014-2023 FLHX Street Glide
2014-Current FLHTK Limited Ultra
2014-Current FLHTCU Ultra Classic
2014-Current FLHTCUG Tri Glide Ultra
2015-2023 FLTR Road Glide
2020-Current FLTRK Limited Road Glide Ultra
2016-Current FLTRU Road Glide Ultra
This list is not conclusive. Product may fit additional bikes.
Specs
- Class D 2-Channel Power Amplifier
- 80W x 2 @ 2 ohms (RMS)
- No Radio Flash Required
- Bypass Port For System Expansion
- Street Glide®/Ultra® Mounting Plate
- Road Glide® Mounting Plate
- Plug & Play Power, Speaker, & Input Wiring
- Speaker Level Input For HD OEM Radio or Any Aftermarket Receiver
- Input Sensitivity Adjustment
- High Efficiency Design Will Not Overload HD Electrical Systems
- 2-Year Warranty
Brand
Kenwood Excelon
Recommended for You
- Choosing a selection results in a full page refresh.
!