Skip to content
BEWARE of imitation websites - Read More
BEWARE of imitation websites - Read More

Dynaudio P4-C65 Slimline In-Ceiling Speaker with 6.5 Inch Woofer (Each)

UPC: 5706937921627
$399.00

SKU P4-C65

Product Qualifies for FREE Ground Shipping

Dynaudio P4-C65 Slimline In-Ceiling speaker with 6.5 Inch Woofer (Each)

P4-C65
Overhead projection

Slimline in-ceiling speaker with a 6.5in woofer

Whether you re installing overhead speakers for a Dolby ATMOS system in a fancy home-cinema room, or you re specifying a distributed audio system for bedrooms, the kitchen and so on, you need to know your speakers are up to the job. And in these systems, consistency is crucial.

The P4-C65 is slim enough to fit into cavities as little as 72mm deep, so even if you re dealing with varying spaces between rooms, you can ensure that the audio delivery is identical across the whole installation.

The frame fits in place using ingeniously simple doglegs, which simply squeeze onto the drywall material by hand. Then the speaker simply twists and locks into place. You can do it one-handed a reassuring thought when you re standing on top of a high stepladder. And you don t even need any tools.

The P4-C65 uses a soft-dome tweeter, along with a 6.5in MSP (Magnesium Silicate Polymer) woofer materials and technologies you ll find in our high-end home, pro and car systems. The tweeter can also be adjusted to compensate for room character; -3dB, 0dB and +3dB settings are available.

The paintable magnetic grille completes the picture, helping the speaker blend into the room so it s only heard, not seen.



Specs
Type: 2-way in-ceiling
Drivers: Tweeter: 28 mm (1 in)
Mid/bass: 165 mm (61/2 in)
Frequency response (+/- 3 dB): 46 Hz 20 kHz
Impedance (nominal/minimum): 8 /5
Sensitivity (dB SPL [2.83 V/1 m]): 87.5 dB
Specification sheet for Performance Series part 1
Continuous power*: 40 W
Long term power*: 80 W
Tweeter level options: -3 dB, 0 dB, +3 dB
Tweeter orientation: Pivoting 360*
Dimensions/depth: 232 mm / 72 mm (9 1/8 in / 2 3/4 in)
Cut-out dimensions: 210 mm (8 1/4 in)