Dynaudio Focus 50 3-Way Active Floorstanding Wireless Streaming Loudspeaker (Pair)

Focus 50
Perhaps the world’s most advanced active wireless hi-fi system

Focus 50 is the pinnacle of wireless hi-fi. All the convenience of a consumer speaker system with all the heavyweight credentials of our most prestigious hi-fi speakers.

Focus 50 is an active wireless stereo speaker system brimming with connectivity. If you want to fill your room with true audiophile performance without also filling it with cables, boxes and racks, this one is for you.

Connect over the air via Apple AirPlay 2 from your MacBook, iPad or iPhone; with Google Chromecast from your Android phone, tablet or Chromebook; using Spotify Connect or Tidal Connect from… well, anything with Spotify or Tidal on it. Hook up with Roon; stream via Bluetooth. You can even connect your physical digital sources via coaxial or optical digital inputs, your analogue ones (including turntables, 8-track machines and Edison Concert Phonographs) via line-in or a compatible adaptor, and your networked devices via Ethernet or Wi-Fi.

What does that mean? Effectively, that if it’s been released as a recording, you can listen to it. All of it. And hi-res heaven is only a smartphone swipe away.

Focus 50 is designed for living rooms, not sterile listening caves. It’s built for those who want to share amazing sound with their loved ones (invite them over and get them connected… but good luck getting them to leave again). That’s why we’ve also built-in WiSA streaming. Focus 50 can connect wirelessly to your TV (and therefore anything else connected to it) and take the place of a hulking AV receiver/cable tangle/equipment stand combination. The only downside? Your cat won’t be able to warm itself on the amp any more…

Simple set-up, powerful performance
We’d be amazed if it took you longer than five minutes to go from unboxing to listening. Just plug the speakers into the mains, launch the accompanying Dynaudio app, follow the guided set-up instructions (which gets you connected to your network and helps you optimize your speakers), and that’s it.

Focus 50 only needs two cables: one for each power plug. That’s because its amplifiers are built in. And not just one amplifier per speaker either – each individual driver has its own amp, specifically tuned and optimized to work with that exact unit. No compromising with one-size-fits-nothing amplification, no hassle with component matching, no cables gathering dust. It’s a tailored system.

Each speaker has three class-D amplifiers on board: one 110W unit for the Cerotar tweeter, a 280W amp for the neodymium midrange driver, and one 280W amp for the twin Esotec+ bass drivers (which are driven in parallel). They all come from our partners at Pascal in Copenhagen – the same company we’ve worked with to create the power plants for our mighty Core professional studio systems. Peak power, you ask? A whopping 1000W. The Focus 50s – and your ears – are in good hands.

All that power is marshalled by sophisticated DSP (digital signal processing) technology – the same type we use in our Core and LYD pro ranges. During set-up in the app, tell the speakers where they are in the room (near a wall, in a corner or in free space) and they’ll optimize their performance for that position. And if you (or an installer) want to take calibration to the next level, there’s optional Dirac Live tech for total customization.

We’ve even included custom EQ presets that take into account whether or not the magnetic grille is installed… and you don’t have to do anything to activate them (besides installing said grille, of course). Auto-sensing technology in the speaker understands when the grille is on or off – and the ‘Y’-shaped light briefly glows blue to let you know that it knows. Ingenious.

And to prevent speaker damage at high volumes, we’ve designed a custom sliding high-pass filter that reduces woofer excursion as the level goes up. (Although your neighbors will probably be banging on the wall long before that happens.)

Traditional Dynaudio expertise
We’re always excited to be able to use new flagship hardware across our range. Focus 50 draws heavily from techniques and technologies used in our high-end Contour and Confidence passive hi-fi families.

For example, the soft-dome Cerotar tweeter uses the Confidence’s Hexis inner dome. It’s a clever extra part that sits just behind the playing surface to optimize airflow and minimize unwanted resonances. Sitting behind it is a strontium carbonate Ferrite+ magnet system to maximize sensitivity. In English, that means sweeter, clearer treble, which is easier to listen to for much longer.

Complementing the tweeter is a dedicated midrange driver (the only one in the Focus range), derived from the award-winning Contour 60. It’s a 15cm unit with a powerful neodymium magnet, a glass-fiber voice-coil former and a trademark Dynaudio aluminum voice-coil. This fleet-footed unit uses lightweight magnet and coil materials to give it more agility while maintaining a tight grip on midrange frequencies. And for you, that means Contour-level performance.

Handling the bottom end is a pair of 18cm Esotec+ woofers. They use trickle-down tech from both Confidence and Contour to deliver tight, powerful bass. Unlike other Focus models, however, there’s a copper voice-coil sitting inside the Ferrite+ magnet. That’s because, as a pure bass driver, this driver doesn’t need to reproduce agile midrange tones – and so can have more moving mass. Power and control are front and center.

Designed for life
No gimmicks, no nonsense – just clean, stylish Danish design and craftsmanship. From the anodized brushed aluminum cover rings around the drivers, to the subtle Dynaudio logo atop the speaker grille, and the gently glowing light (which changes color to let you know what the speaker is doing) we’ve made sure Focus 50 looks the part when sitting in a real living space.

Run your fingers over the beautiful open-grained Blonde Wood and Walnut Wood finishes, or marvel at the glassy High Gloss Black and High Gloss White lacquer. Take in the shape of the gently tapered cabinet. Even the backplate has been given special treatment.

Focus 50 is the ultimate premium wireless hi-fi system. True audiophile quality with all the benefits of modern digital streaming technology. It’s time to listen to something new…

Studio-grade performance
Focus’s amplifiers are based on the same technology we use in our Core range of professional reference monitors – including the room-compensation algorithms. That means you can get closer than ever to what the artists heard in the studio.

Streaming marvel
If you can get it online, you can stream it to Focus 10. A royal flush of services – including Spotify Connect, Tidal Connect, Apple AirPlay 2, Google Chromecast and Roon – bring millions of hi-fi-quality tracks directly to your living room.

Classic Dynaudio drivers
From the soft-dome tweeter with Hexis, to the MSP mid/bass driver with its signature aluminum voice-coil, Focus 10 doesn’t stray from its legendary roots. Modern design, classic performance.

Danish design
Clean, elegant, contemporary and sleek. We think speakers should be designed for the people who use them, which is why you’ll only find fine, honest materials and finishes: Black High Gloss, White High Gloss, Blonde Wood and Walnut Wood.