TEAC TN-420 Belt-Driven Turntable with Ortofon 2M Red Phono Cartridge Bundle
This Turntable Bundle consists of the following:
QTY: 1 Teac TN-420 Belt-Driven Turntable with S-Shaped Tonearm
QTY: 1 Ortofon 2m Red Moving Magnet Phono Cartridge
**Phono Cartridge comes professionally mounted and calibrated
What better way to celebrate the 50th Anniversary of the Summer of Love than with the certifiably far-out TN-420 turntable
Beneath the groovy exterior, this 2-speed turntable combines a high density MDF base with an expertly machined aluminum platter to deliver incredible resonance rejection, speed control and audio fidelity. And for easy connection to virtually any audio system, the TN-420 features switchable Phono / Line level outputs on RCA connectors and a digital output on USB for easy connection to a Mac or PC for playback and archiving of your favorite LPs.
Specs
TEAC TN-420 Specifications: Turntable section Drive System Belt Drive
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation +/ 2%
Wow and Flutter 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 12", 30cm
Tonearm section Type Static Balance, S-shaped
Effective Arm Length 8.8", 223mm
Stylus Pressure Range 0 to 5g
Supported Cartridge Weight 3.5 to 6.5g
Anti-skating Adjustment Supported
Cartridge section Type MM type (audio-technica AT95E factory installed)
Stylus Shape Elliptical
Stylus Construction Bonded Round Shank
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Supported Load Impedance 47k ohms
Output Voltage 3.5mV (1kHz, 5cm/sec.)
Stylus Pressure 2.0g +/ 0.5g
Cartridge Weight 5.7g +/ 0.5g
Head-shell Weight 10g (including Screws, Nuts and Wires)
Replacement Stylus audio-technica ATN95E
Phono Equalizer Amplifier Type of Amplifier MM type (On/Thru switchable)
Analog Output Connector RCA Pin jack (Gold-plated)
Output Voltage Phono/Line switchable
Phono Output 4.5mV +/ 3dB
Line Output 120mV ( 13dBV)
USB Output section Connector USB B type
Output Signal PCM 48kHz/16-bit
Supported OS Windows 7
Windows 8
Windows 8.1
Windows 10
OS X Lion (10.7)
OS X Mountain Lion (10.8)
OS X Mavericks (10.9)
OS X Yosemite (10.10)
OS X El Capitan (10.11)
macOS Sierra (10.12)
Power AC 100 to 240V, 50/60Hz
Power Consumption 1.5W (less than 0.5W at Standby)
Overall Dimensions (W x H x D) 16.5" x 4.6" x 14.0"
420 x 117 x 356 mm
Weight Approx. 10.8 lbs. 4.9 kg
Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet for Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-1), Owner's Manual (including Warranty Card)
Ortofon 2M Red Specifications:
Designed with a heavier base construction to decrease vibration for superior performance
Tone arm action starts and stops automatically using gentle lifting and lowering motions to protect your vinyl
Moving-magnet (MM) cartridge headshell is removable
Turntable sheet is 5mm thick; uses hologram vibration analysis to improve its ability to hold a record
DC servo motor and belt drive system with rotation speeds of 33 1/3 or 45 rpm
Technical data Output voltage at 1000 Hz, 5cm/sec. - 5,5 mV
Channel balance at 1 kHz - 1,5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at - 3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 m
Compliance, dynamic, lateral - 20 m/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 m
Tracking force range - 1,6-2,0g (16-20 mN)
Tracking force, recommended - 1,8 g (18 mN)
Tracking angle - 20
Internal impedance, DC resistance - 1,3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
Cartridge weight - 7,2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)
How to replace M2,0 mm screws on 2M Red Verso 1. Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamond.
2. Using Torx 8 key, unscrew the black screw from the Verso top plate.
3. Remove the top plate from the cartridge body by pulling the screws off.
4. Remove the two countersunk screws from the top plate.
5. Insert the two M2,0 mm screws in the top plate.
6. Mount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from above.
7. Mount the black screw in the top plate and tighten with appropriate force.
8. Mount the cartridge on the tonearm using the enclosed tool.
9. Mount the stylus with the stylus protection guard on the cartridge body.
2M Red accessories included the package: 1 x Stylus brush
1 x Screwdriver
2 x Screw M2,5 x 5
2 x Screw M2,5 x 7
2M Red Verso accessories included the package: 1 x Stylus brush
1 x Allen key Torx 6
1 x Allen key Torx 8
2 x Screw M2,0 x 6
