Skip to content

Parasound ZAmp Quattro Four Channel Dual Zone Power Amplifier B-Stock

UPC: 791084504668
Save 26%
Original price $650.00
Current price $479.00

SKU ZampQuattroB

Product Qualifies for FREE Ground Shipping

  • Parasound ZAmp Quattro Four Channel Dual Zone Power Amplifier B-Stock Full Warranty

    The Zamp Quattro is a four channel, two zone power amplifier. Its unique half rack and compact size makes it incredibly versatile. Unlike most Class D amplifiers that are based on inexpensive car audio chips, the Zamp Quattro's Swedish Class D design uses only high-grade parts. With additional output filtering and class AB input stage the result is a great sounding amp that is stable with low impedance loads and with reduced heat. Speaker level inputs allow the Zamp Quattro to work with any receiver, even those without preamp outputs.
  •  4 channels in the same size as a Zamp v.3
  •  50 watts RMS x 4 @ 8 Ω, all channels driven
  •  90 watts RMS x 4 @ 4 Ω, all channels driven
  •  Class AB input stage plus premium Class D power stage
  •  Speaker level input for integration with any stereo receiver, even w/o pre outs jacks
  •  Bus for looping Zone 1 to Zone 2
  •  Ultra-sensitive audio trigger for automatic turn on
  •  12v trigger input for automatic turn on
  •  Powered 12v output to trigger other devices
  •  Loop output for sending audio to another amplifier
  •  Level controls for each channel
  •  Detachable phoenix style speaker connectors
  •  Unique half-rack width chassis; 1 rack space high
  •  Fastening hardware available for rack mounting
  •  Parasound 2 year parts, 2 years labor warranty
    (For USA and Canada purchases only)
  •  Power Output - All Channels Driven
            50 watts RMS x 4, (20 Hz - 20 kHz, 8 Ω)
            90 watts RMS x 4, (20 Hz - 20 kHz, 4 Ω)

            Frequency Response
            10 Hz - 60 kHz, +0/-3 dB

            Total Harmonic Distortion
            < .05 % at typical listening levels
            < 1 % at full power

            Interchannel Crosstalk
            70 dB at 20 kHz

            Input Sensitivity:
            700mv = Full output (50 Watts @ 8 Ω)
            Total Gain = 29 dB (Level controls set to Maximum)

            S/N Ratio
            > 112 dB, input shorted, IHF A-weighted

            DC Trigger Requirements
            +9 Vdc to +12 Vdc, 2 mA

            Audio Trigger Requirements
            1 mV AC (Quieter setting)
            10 mV AC (Louder setting)

            AC Power Requirement:
            600 Watts Maximum
            50 Watts Typical
            15 Watts Idle
            0.5 Watts Standby
            110-130 VAC 60 Hz or 220-240 VAC 50 Hz
            Note: AC mains voltage is set only by qualified electronics technician.

            Width (Black): 9.5" (241 mm) - Rack Mount Face Plate
            Width (Silver): 8.5" (220 mm) - Non-Rack mount Face Plate
            Depth: 10" (254 mm)
            Height, with feet: 2" (51 mm)
            Height, without feet: 1.75" (45 mm)

            Net: 4.5 lbs (2.0kg)
            Shipping: 7.5 lbs (3.4kg)

            Rack Mount Accessory:
            SBS: Side by Side Mounting bracket, purchased separately
            Zblank: Panel extender, purchased separately