Skip to content

Parasound ZAmp Quattro Four Channel Dual Zone Power Amplifier

UPC: 791084504668
Call for Availability
Original price $650.00
Current price $499.00

SKU ZampQuattro

Product Qualifies for FREE Ground Shipping

Parasound ZAmp Quattro Four Channel Dual Zone Power Amplifier

**Zamp Quattro model has rack ears**

The Zamp Quattro is a four channel, two zone power amplifier. Its unique half rack and compact size makes it incredibly versatile. Unlike most Class D amplifiers that are based on inexpensive car audio chips, the Zamp Quattro's Swedish Class D design uses only high-grade parts. With additional output filtering and class AB input stage the result is a great sounding amp that is stable with low impedance loads and with reduced heat. Speaker level inputs allow the Zamp Quattro to work with any receiver, even those without preamp outputs.

  • 4 channels in the same size as a Zamp v.3
  • 50 watts RMS x 4 @ 8 , all channels driven
  • 90 watts RMS x 4 @ 4 , all channels driven
  • Class AB input stage plus premium Class D power stage
  • Speaker level input for integration with any stereo receiver, even w/o pre outs jacks
  • Bus for looping Zone 1 to Zone 2
  • Ultra-sensitive audio trigger for automatic turn on
  • 12v trigger input for automatic turn on
  • Powered 12v output to trigger other devices
  • Loop output for sending audio to another amplifier
  • Level controls for each channel
  • Detachable phoenix style speaker connectors
  • Unique half-rack width chassis; 1 rack space high
  • Fastening hardware available for rack mounting
  • Parasound 2 year parts, 2 years labor warranty
    (For USA and Canada purchases only)
  • Power Output - All Channels Driven
    50 watts RMS x 4, (20 Hz - 20 kHz, 8 )
    90 watts RMS x 4, (20 Hz - 20 kHz, 4 )

    Frequency Response
    10 Hz - 60 kHz, +0/-3 dB

    Total Harmonic Distortion
    < .05 % at typical listening levels
    < 1 % at full power

    Interchannel Crosstalk
    70 dB at 20 kHz

    Input Sensitivity:
    700mv = Full output (50 Watts @ 8 )
    Total Gain = 29 dB (Level controls set to Maximum)

    S/N Ratio
    > 112 dB, input shorted, IHF A-weighted

    DC Trigger Requirements
    +9 Vdc to +12 Vdc, 2 mA

    Audio Trigger Requirements
    1 mV AC (Quieter setting)
    10 mV AC (Louder setting)

    AC Power Requirement:
    600 Watts Maximum
    50 Watts Typical
    15 Watts Idle
    0.5 Watts Standby
    110-130 VAC 60 Hz or 220-240 VAC 50 Hz
    Note: AC mains voltage is set only by qualified electronics technician.

    Width (Black): 9.5" (241 mm) - Rack Mount Face Plate
    Width (Silver): 8.5" (220 mm) - Non-Rack mount Face Plate
    Depth: 10" (254 mm)
    Height, with feet: 2" (51 mm)
    Height, without feet: 1.75" (45 mm)

    Net: 4.5 lbs (2.0kg)
    Shipping: 7.5 lbs (3.4kg)

    Rack Mount Accessory:
    SBS: Side by Side Mounting bracket, purchased separately
    Zblank: Panel extender, purchased separately