WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Parasound P6 Halo 2.1 Channel Stereo Preamplifier and DAC B-Stock Full Warranty

UPC: 791084310542
Save 22%
$1,595.00
$1,249.99

SKU P6BlackB
PARASOUND B-STOCK
  • 100% WORKING CONDITION
  • THOROUGHLY INSPECTED
  • ORIGINAL PACKAGING + ALL ACCESSORIES
  • FULL MANUFACTURER'S WARRANTY
  • Parasound P6 Halo 2.1 Channel Stereo Preamplifier and DAC B-Stock Full Warranty


    New Features (Changes from the P 5)

    • ESS Sabre32 Reference DAC replaces the original Burr-Brown DAC
    • USB input is now capable of DSD & 384kHz/32-bit PCM (up from 96Khz/24-bit)
    • Burr Brown analog resistor ladder volume control
    • Dimmable front panel volume display
    • Upgraded USB receiver with "plug and play" operation with Windows 10
    • An additional optical input (2 total)
    • Ball bearing supported solid aluminum volume knob
    • Programable default turn on volume setting
    • Favorite volume memory with remote control button
    • Increased phono stage gain for lower output cartridges
    • Improved Left/Right channel separation and balance tracking
    • Sand blasted metal end caps replace plastic end caps on the P 5
    • Updated cosmetics with subtle gold highlights

    Preamp and DAC Features

      • ESS Sabre32 Reference DAC (ES9018K2M)
      • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
      • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
      • Coax and optical inputs accept PCM up to 192kHz/24-bit
      • Analog bass management with high & low pass crossovers
      • Home theater bypass input for surround sound integration
      • Front panel subwoofer level control
      • Dedicated high current headphone amplifier (TI TPA6120)
      • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
      • Front panel Aux input with automatic +12 dB gain stage
      • 5 pairs RCA line level Analog inputs
      • 1 pair XLR balanced Analog input
      • Balanced XLR and RCA left and right preamp outputs
      • 1 balanced XLR and 2 RCA subwoofer outputs
      • Bass & treble controls with relay bypass from remote or front panel
      • Rear panel IR input and IR loop output jacks
      • 12 Volt trigger output
      • Back-lit remote control with discrete buttons
      • 0.5w standby power consumption meets Energy Star & EU specs
    Specs
    Frequency Response
        10 Hz - 100 kHz, +0/-3 dB

        20 Hz - 20 kHz, +0/-0.5 dB

    Total Harmonic Distortion (THD)
    < 0.01 %

    Interchannel Crosstalk
    > 70 dB at 20 kHz
    > 78 dB at 1 kHz

    Preamplifier Stage Input Sensitivity
    300 mV in for 1 V
    Total Gain: 10 dB
    Max Output: 7.5V

    S/N Ratio - Line Inputs 1- 5
    > 108 dB (shorted, IHF A-weighted)
    > 88 dB (shorted, unweighted)

    S/N Ratio - DAC Inputs
    > 108 dB (IHF A-weighted)
    > 88 dB (unweighted)

    S/N Ratio - Phono Input
    MM > 80 dB (shorted, IHF A-weighted)
    MM > 70 dB (shorted, unweighted)
    MC > 67 dB (shorted, IHF A-weighted)
    MC > 55 dB (shorted, unweighted)

    Phono Stage Sensitivity / Input Impedance
    MM: 38 dB / 47 k Ω
    MC: 52 dB / 47 k Ω or 100 Ω

    Input Impedance
    Unbalanced: 24 k Ω
    Balanced: 100 k Ω per leg

    Preamplifier Output Impedance
    Unbalanced: 100 Ω
    Balanced: 470 Ω per leg

    High & Low Pass Crossover Slope
    12 dB per octave

    Supported DAC Sampling Rates
    USB: up to 384 kHz / 32-bit PCM
    DSD Native: DSD 64, DSD 128, DSD 256
    DSD over PCM (DoP) at 384 kHz
    Coax/Optical: up to 192 kHz / 24-bit PCM

    Digital to Analog Converter
    ESS Sabre32 Reference ES9018K2M
    384 kHz / 32-bit

    USB 2.0 Controller
    Savitech SA9227, 384 kHz / 32-bit

    Headphone Amplifier
    Texas Instruments TPA6120A
    Output Impedance 10 ohms

    XLR Pin Identification
    1 = Ground (Shield)
    2 = Positive
    3 = Negative (Return)

    Dimensions
    Width: 17-1/4" (437 mm)
    Depth: 15" (381 mm)
    Depth, with cables 17" (432 mm)
    Height, with feet: 4-1/8" (105 mm)
    Height, without feet: 3-1/2" (89 mm), 2U

    Net Weight
    14 lb. (6.3 kg)

    Shipping Weight
    21 lb. (9.5 kg)

    Power Requirement
    Standby: 0.5 watts
    Power On: 15 watts
    100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB
    20 Hz - 20 kHz, +0/-0.5 dB

      WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

      You recently viewed

      Clear recently viewed