WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Parasound Halo P7 7.1 Channel Preamplifier

UPC: 791084310429
Save 52%
$2,295.00
$1,099.00

SKU P7Black

Parasound Halo P7 7.1 Channel Preamplifier


Input/Outputs:
- 2 Multi channel (7.1) inputs for surround sound movies and music
- 7 Stereo inputs (one balanced XLR input)
- 1 MM or MC phono input
- Front panel input jack for portable MP3 player
- Unbalanced RCA and balanced XLR 7.1 outputs
- Subwoofer output with analog bass management
- Serial port for RS-232 control
- Rear panel IR input jack
- 3 different 12v trigger outputs
- High quality headphone output

  •  Software Features:
    - Custom input naming for all inputs
    - Theater bypass mode for connecting a digital surround receiver
    - Source input level matching
    - Headphone level offset
    - Analog bass management for stereo inputs
    - Links to Parasound Zhd HDMI selector (does not decode audio)

  •  Other Features:
    - Relay-switched input select, mute & tone control engage/bypass
    - Full-featured remote control
    - Bass and Treble adjustable by remote
    - Tone controls engage/bypass by remote
    - Left/Right balance adjust by remote
    - Front/Rear balance adjust by remote
    - Subwoofer output level trim by remote
    - 20 dB partial mute and full mute by remote
    - 5 brightness settings for front panel display
    - Three 12V trigger outputs for 3 different functions
    - 12V trigger can be activated by remote control
    - Rack mount kit available, (2 rack spaces without feet)
    - Parasound 5 years labor and 5 years parts warranty
        (For USA and Canada purchases only)
  • Specs

    Frequency Response:
             5 Hz - 100 kHz, +0/-3 dB

            Total harmonic distortion:
            < 0.006% at 20 kHz

            S/N ratio:
            > 110 dB, input shorted, IHF A-weighted
            > 95 dB, input shorted, unweighted

            Cross-talk:
             85 dB at 20 kHz

            Line Input Impedance :
            Unbalanced: 14.2k Ω
            Balanced: 4.7k Ω per leg

            Phono Input Impedance :
            MM setting: 47k Ω
            MC setting: 100 Ω

            Output Impedance :
            Unbalanced: < 60 Ω
            Unbalanced: < 60 Ω per leg

            Input Sensitivity:
            200 mV for 1 V output
            Total Gain: 14 dB (Volume limiter set to 110)
            Maximum Output: 8 V (Vol. Limiter set to 110)

            XLR Pin Identification:
            1 = Ground (Shield)
            2 = Positive
            3 = Negative

            AC Power Requirement:
            100 - 250 V / 50 - 60 Hz (voltage is automatically selected)
            10 watts standby
            65 watts when turned on

            Dimensions:
            Width: 17-1/4" (437 mm)
            Depth: 13-3/4" (350 mm)
            Height, with feet: 4-1/8" (105 mm)
            Height, without feet: 3-1/2" (89 mm)

            Weight:
            Net: 13.5 lbs. (6.1 Kg)
            Shipping: 20.5 lbs. (9.3 Kg)

            Rack Mount Accessory:
            HRA 2 (May be purchased separately)

      WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

      You recently viewed

      Clear recently viewed