WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Parasound Halo JC 3+ Phono Preamplifier B-Stock Full Warranty (Old Cosmetics)

UPC: 791084211276
Save 20%
$2,995.00
$2,395.00

SKU JC3+SilverBOldCosmetics
PARASOUND B-STOCK
  • 100% WORKING CONDITION
  • THOROUGHLY INSPECTED
  • ORIGINAL PACKAGING + ALL ACCESSORIES
  • FULL MANUFACTURER'S WARRANTY
  • Parasound Halo JC 3+ Phono Preamplifier B-Stock Full Warranty (Old Cosmetics)


    Designed by John Curl - creator of the legendary Vendetta Research phono preamp
    Inputs and outputs use Vampire brand 24k gold-plated RCA jacks
    Balanced outputs use Neutrik brand premium XLR jacks
    MM 47 k ohm, MC 100 ohm or MC 47 k ohm; (MC 47 k ohm is ideal for high-end Grado moving iron cartridges)
    S/N 86 dB MM; 75 dB MC
    RIAA accurate within 0.2 dB
    Exclusively Vishay-Dale resistors in the audio path
    Triple shielding; low-carbon mild steel partitions isolate the power supplies & AC wires
    Dual mono design; each audio channel is separately enclosed in its own extruded aluminum enclosure
    Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel
    Superior R-core type power transformer
    Mono switch can improve sound of mono and older LPs
    Built-in AC line conditioner to prevent AC noise from polluting the circuits
    AC polarity reverse switch can reduce hum in many systems
    Non-magnetic aluminum rear panel for purest sound
    Turn On Options switch: manual or auto with 12v trigger input
    Premium detachable heavy gauge IEC AC cord
    2 6’ (3m) trigger wires included
    2u Chassis, rack mountable with HRA2 (sold separately)
    Parasound 5 year parts, 5 years labor warranty (For USA and Canada purchases only)
    Specs
    Frequency Response 20 Hz - 20 kHz, +/- 0.2 dB

    THD Distortion THD: < 0.005% at 20 kHz

    S/N Ratio (MM) > 86 dB, input shorted, IHF A-weighted > 80 dB, input shorted, unweighted

    S/N Ratio (MC) > 75 dB, input shorted, IHF A-weighted > 70 dB, input shorted, unweighted

    Crosstalk 72 dB at 1 kHz

    Phono Input Impedance MM setting: 47k ohm MC setting: 47k ohm or 100 ohm

    Output Impedance Unbalanced: < 100 ohm Balanced: < 100 ohm per leg

    Input Sensitivity at 1 kHz MM: 4mV in for 1.0V output MC: 0.4mV for 1.0V output

    Total Gain MM: 47 dB MC: 68 dB

    XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return)

    AC Power Requirement 115 or 230 VAC 50 - 60 Hz 12 watts

    Dimensions Width: 17 1/4" (437 mm) Depth: 13 3/4" (350mm) Height, with feet: 4 1/8" (105mm) Height, without feet: 3-1/2" (89mm)

    Weight Net: 18 lbs. (8.2 kg) Shipping: 25 lbs. (11.4 kg)

    Rack Mount Accessory HRA 2 (May be purchased separately)

      WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

      You recently viewed

      Clear recently viewed