WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Parasound Halo JC 3+ Phono Preamplifier

UPC: 791084211276
Call for Availability

SKU JC3+Silver

Product Qualifies for FREE Ground Shipping

Designed by John Curl - creator of the legendary Vendetta Research phono preamp
Inputs and outputs use Vampire brand 24k gold-plated RCA jacks
Balanced outputs use Neutrik brand premium XLR jacks
MM 47 k ohm, MC 100 ohm or MC 47 k ohm; (MC 47 k ohm is ideal for high-end Grado moving iron cartridges)
S/N 86 dB MM; 75 dB MC
RIAA accurate within 0.2 dB
Exclusively Vishay-Dale resistors in the audio path
Triple shielding; low-carbon mild steel partitions isolate the power supplies & AC wires
Dual mono design; each audio channel is separately enclosed in its own extruded aluminum enclosure
Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel
Superior R-core type power transformer
Mono switch can improve sound of mono and older LPs
Built-in AC line conditioner to prevent AC noise from polluting the circuits
AC polarity reverse switch can reduce hum in many systems
Non-magnetic aluminum rear panel for purest sound
Turn On Options switch: manual or auto with 12v trigger input
Premium detachable heavy gauge IEC AC cord
2 6’ (3m) trigger wires included
2u Chassis, rack mountable with HRA2 (sold separately)
Parasound 5 year parts, 5 years labor warranty (For USA and Canada purchases only)
Frequency Response 20 Hz - 20 kHz, +/- 0.2 dB

THD Distortion THD: < 0.005% at 20 kHz

S/N Ratio (MM) > 86 dB, input shorted, IHF A-weighted > 80 dB, input shorted, unweighted

S/N Ratio (MC) > 75 dB, input shorted, IHF A-weighted > 70 dB, input shorted, unweighted

Crosstalk 72 dB at 1 kHz

Phono Input Impedance MM setting: 47k ohm MC setting: 47k ohm or 100 ohm

Output Impedance Unbalanced: < 100 ohm Balanced: < 100 ohm per leg

Input Sensitivity at 1 kHz MM: 4mV in for 1.0V output MC: 0.4mV for 1.0V output

Total Gain MM: 47 dB MC: 68 dB

XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return)

AC Power Requirement 115 or 230 VAC 50 - 60 Hz 12 watts

Dimensions Width: 17 1/4" (437 mm) Depth: 13 3/4" (350mm) Height, with feet: 4 1/8" (105mm) Height, without feet: 3-1/2" (89mm)

Weight Net: 18 lbs. (8.2 kg) Shipping: 25 lbs. (11.4 kg)

Rack Mount Accessory HRA 2 (May be purchased separately)

    California customers: Please click here for your Proposition 65 warning.

    You recently viewed

    Clear recently viewed