Paradigm SA-ADP In Wall/In Ceiling Surround Speaker (Each)

UPC:
Call for Availability
$1,000.00

SKU SA-ADP
Our Industry-Leading ADP™ Technology in a Reference In-Wall!

For years we were asked to design our ADP (Adapted Dipole) technology around an in-wall application. But an ADP in-wall speaker? Hmm! That was a tough one. Listening test after listening test and a host of ‘almost theres’ ended up on the testing room floor. That’s because we’re perfectionists. We wanted the whole package: a large reverberant, non-localized soundfield with full-range response (and yes, we do mean FULL RANGE!), powered by state-of-the-art driver technology. All of it supported by Paradigm’s Ultra-Rigid™ mounting systems. Our ADP in-wall design was born … delivering surround sound the way it was meant to be heard:

Conventional forward-radiating speakers cannot reproduce movie theater surround sound in your home. If they are loud enough for their sound to blend with the front speakers they draw attention to themselves. Turn them down so they don’t distract you and they won’t blend with the fronts. ADP reverberant surround/rear speakers are a whole different story:

  • Just like movie theater speakers, Reference ADP speakers envelop you in sound without drawing your attention away from the movie you’re watching;
  • They add size and dimension to the soundstage;
  • They ensure a seamless transition when sounds and effects move from front and center speakers to surround and rear speakers;
  • They’re ideal for multichannel music too! Their large non-localized soundfield adds multidimensional realism to the acoustic space.
  • Specs
    SA-ADP Specifications

    Design 7-driver, 3-way in-wall surround / rear, Ultra-Rigid™ die-cast chassis / mounting bracket (optimized reverberant soundfield)

    Crossover 3rd-order electro-acoustic at 2.5 kHz; 2nd-order electro-acoustic at 550 Hz

    Frequency Response On-Axis ±2 dB from 54 Hz - 20 kHz

    Frequency Response 30° Off-Axis (reverberant soundfield)

    High Frequency Driver Two 25-mm (1 in) G-PAL™ domes, dual super-neodymium magnets, die-cast heatsink chassis

    Midrange Frequency Driver Four 29-mm (1-1/8 in) x 102-mm (4 in) S-PAL™ cones, Two 14-mm (9/16 in) four-layer voice-coils, dual super-neodymium magnets, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™

    Low Frequency Driver 210-mm (8 in) co-polymer mineral-filled polypropylene cone, 38-mm (1-1/2 in) dual-layer voice-coil, massive ceramic / ferrite magnet, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™

    Low Frequency Extension 40 Hz (DIN)

    Sensitivity Room / Anechoic 90 dB / 86 dB

    Impedance Compatible with 8 ohms

    Suitable Amplifier Power Range 15 - 180 watts

    Maximum Input Power 120 watts

    Finishes White, paintable

    Weight 11.8 lbs. (5.4 kg)

    Overall Dimensions 20.0625" (51cm) Height
    9.0625" (23.1cm) Width

    Cut-Out Dimensions 19.125" (48.6cm) Height
    8.1875" (20.7cm) Width

    Minimum Mounting Depth Depth required is the distance between 1/2" drywall, or similar material. 3" (7.6cm)

    Minimum Internal Volume Required 0.70 cu ft (20 L)

      You recently viewed

      Clear recently viewed