Paradigm PV-60R PV Series In-Wall/In-Ceiling Speaker (Pair)
Behind Every Good Speaker … lies a good design! While many in-wall / in-ceiling speakers may look good, it’s what’s behind the speaker that counts! The design and technology … the stuff you can’t see, but if not ‘done right’ results in a poor-sounding speaker. Behind every PV speaker is a combination of design, technology and engineering that is simply unheard of in this entry-level segment of the market. In fact, PV speakers take our industry-leading Performance and Value to an entirely new level.
Textured Pure Silk Domes with ferro-fluid cooling and damping promote clear and well-extended high-frequency response, superb transparency and a tremendous spaciousness.
Mineral-Filled Polypropylene Cones deliver natural, detailed midrange performance in addition to smooth, well-articulated and well-extended bass response.
Rigid IRP™ Injection-Molded Ribbed Polymer Chassis.
Easy Installation! Unique hidden spring clamps make installation a snap!
A word about Paradigm Fireproof Backboxes
Paradigm in-wall applications can now be spec’d for MDU applications.
Paradigm backboxes meet the following:
• ‘One-Hour Fire-Rating’ requirements
• ‘For Use in Air Handling Spaces’ requirements
Paradigm backboxes will contain fire, gas, smoke and heat within the enclosure for up to one hour. Paradigm backboxes also meet the following codes:
ASTM E119-98 Vertical
ASTM E119-98 Horizontal
Design 2-driver, 2-way in-ceiling / in-wall, coaxially mounted high-frequency driver, IRP™ chassis / spring clamps
Crossover 2nd-order electro-acoustic at 2.5 kHz
Frequency Response On-Axis ±2 dB from 70 Hz - 20 kHz
Frequency Response 30° Off-Axis ±2 dB from 70 Hz - 18 kHz
High Frequency Driver 25-mm (1 in) silk dome
Mid/Bass Frequency Driver 165-mm (6-1/2 in) mineral-filled polypropylene cone
Low Frequency Extension 55 Hz (DIN)
Sensitivity Room / Anechoic 89 dB / 85 dB
Impedance Compatible with 8 ohms
Suitable Amplifier Power Range 15 - 70 watts
Maximum Input Power 40 watts
Finishes White, paintable
Weight 3.8 lbs. (1.7 kg)
Overall Dimensions 9" (22.9cm) Diameter
Cut-Out Dimensions 7.75" (19.6cm) Diameter
Minimum Mounting Depth Depth required is the distance between 1/2" drywall, or similar material. 3" (7.6cm)
Minimum Internal Volume Required 0.42 cu ft (12 L)