Paradigm CI Home H65-A 6.5" Angled In-Ceiling Speaker (Each)
by Paradigm
UPC:
$299.99
Quick Specs
In-ceiling round, 30°-Angled Guided Soundfield™ (optional square grille).
1" PTD™ dome tweeter.
6.5" mineral-filled polypropylene bass/midrange driver with oversized computer-optimized ferrite magnets.
Bezel-Free Micro-Perf Grille.
CI HOME SERIES
Your “Go-To” Custom Install Speaker.
The CI Home™ series address the important considerations when selecting custom installation speakers: truly superior sound, easy installation, and a new bezel-free micro-perf grille with an incredibly discreet aesthetic.
High-Quality Components Make An Audible Difference
Superior PTD™ Pure-Titanium Tweeter Domes are Ferro-fluid damped and cooled to ensure smooth high-frequency performance with amazing clarity across a wide listening area.
Pocketed screw holes help to hold the drill steady, making installation a snap.
Easy-access Binding Posts feature a larger wire access hole and connect via banana plug, pin or bare wire.
Rigid ABS clamps cut down on installation time and simplifying installation.
Superior Mineral-Filled Polypropylene Bass/Midrange Cones with oversized computer-optimized ferrite magnets and high-power motor structures deliver detailed midrange performance with clean, extended bass. Even movie dialog is incredibly clean and clear.
NEW Bezel-Free Micro-Perf Grilles.
Magnetically attached grilles: neodymium magnets hold grilles firmly in place.
No masking required—this makes the grilles faster and easier to paint, if painting is desired.
A Behind-the-Ceiling Look at Our ABS Clamps
Without any unnecessary pressure or force, each turn of the screwdriver turns the clamp. We show the starting point, we show the screwdriver working to turn the clamp, and finally, we show the speaker locked into place inside the wall or ceiling. It doesn't get simpler or easier!
A Solid Installation
Our High-Strength ABS Chassis and Clamp System addresses the flexibility problem that plagues all walls and ceilings. ABS stiffness combats unwanted resonances and vibrations and equally important, the new clamp design makes the installer's job easier and faster!
Design 2-driver, 2-way in-ceiling, 30°-Angled Guided Soundfield™ system, ABS chassis & mounting clamps
Crossover 2nd-order electro-acoustic at 2.5 kHz
Frequency Response On-Axis ±2 dB from 70 Hz - 20 kHz
Frequency Response 30° Off-Axis ±2 dB from 70 Hz - 15 kHz
High Frequency Driver 1" (2.5cm) PTD™ dome
Mid/Bass Frequency Driver 6.5" (16.5cm) mineral-filled polypropylene cone
Low Frequency Extension 55 Hz
Sensitivity Room / Anechoic 89 dB / 85 dB
Impedance Compatible with 8 ohms
Suitable Amplifier Power Range 15-80 W
Maximum Input Power 50 W
Finishes White, paintable grille
Weight 4 lbs. (1.8 kg)
Overall Dimensions 11.375" (29cm) Diameter
Cut-Out Dimensions 10.375" (26.5cm) Diameter
Minimum Mounting Depth Depth required is the distance between 1/2" drywall, or similar material. 4" (10.1cm)
CI HOME SERIES
Your “Go-To” Custom Install Speaker.
The CI Home™ series address the important considerations when selecting custom installation speakers: truly superior sound, easy installation, and a new bezel-free micro-perf grille with an incredibly discreet aesthetic.
High-Quality Components Make An Audible Difference
A Behind-the-Ceiling Look at Our ABS Clamps
Without any unnecessary pressure or force, each turn of the screwdriver turns the clamp. We show the starting point, we show the screwdriver working to turn the clamp, and finally, we show the speaker locked into place inside the wall or ceiling. It doesn't get simpler or easier!
A Solid Installation
Our High-Strength ABS Chassis and Clamp System addresses the flexibility problem that plagues all walls and ceilings. ABS stiffness combats unwanted resonances and vibrations and equally important, the new clamp design makes the installer's job easier and faster!
Specs
CI Home H65-A SpecificationsDesign 2-driver, 2-way in-ceiling, 30°-Angled Guided Soundfield™ system, ABS chassis & mounting clamps
Crossover 2nd-order electro-acoustic at 2.5 kHz
Frequency Response On-Axis ±2 dB from 70 Hz - 20 kHz
Frequency Response 30° Off-Axis ±2 dB from 70 Hz - 15 kHz
High Frequency Driver 1" (2.5cm) PTD™ dome
Mid/Bass Frequency Driver 6.5" (16.5cm) mineral-filled polypropylene cone
Low Frequency Extension 55 Hz
Sensitivity Room / Anechoic 89 dB / 85 dB
Impedance Compatible with 8 ohms
Suitable Amplifier Power Range 15-80 W
Maximum Input Power 50 W
Finishes White, paintable grille
Weight 4 lbs. (1.8 kg)
Overall Dimensions 11.375" (29cm) Diameter
Cut-Out Dimensions 10.375" (26.5cm) Diameter
Minimum Mounting Depth Depth required is the distance between 1/2" drywall, or similar material. 4" (10.1cm)