Paradigm CI Home H55-LCR In-Wall LCR Speaker (Each)

Call for Availability

Quick Specs

  • In-wall left / center / right applications.
  • 3/4" PTD™ dome tweeter.
  • Dual 5.5" mineral-filled polypropylene bass/midrange drivers with oversized computer-optimized ferrite magnets.
  • Bezel-Free Micro-Perf Grille.


    Your “Go-To” Custom Install Speaker.
    The CI Home™ series address the important considerations when selecting custom installation speakers: truly superior sound, easy installation, and a new bezel-free micro-perf grille with an incredibly discreet aesthetic.

    High-Quality Components Make An Audible Difference

  • Superior PTD™ Pure-Titanium Tweeter Domes are Ferro-fluid damped and cooled to ensure smooth high-frequency performance with amazing clarity across a wide listening area.
  • Pocketed screw holes help to hold the drill steady, making installation a snap.
  • Easy-access Binding Posts feature a larger wire access hole and connect via banana plug, pin or bare wire.
  • Rigid ABS clamps cut down on installation time and simplifying installation.
  • Superior Mineral-Filled Polypropylene Bass/Midrange Cones with oversized computer-optimized ferrite magnets and high-power motor structures deliver detailed midrange performance with clean, extended bass. Even movie dialog is incredibly clean and clear.
  • NEW Bezel-Free Micro-Perf Grilles.
  • Magnetically attached grilles: neodymium magnets hold grilles firmly in place.
  • No masking required—this makes the grilles faster and easier to paint, if painting is desired.

  • A Behind-the-Ceiling Look at Our ABS Clamps

    Without any unnecessary pressure or force, Each turn of the screwdriver turns the clamp. We show the starting point, we show the screwdriver working to turn the clamp, and finally, we show the speaker locked into place inside the wall or ceiling. It doesn't get simpler or easier!

    A Solid Installation

    Our High-Strength ABS Chassis and Clamp System addresses the flexibility problem that plagues all walls and ceilings. ABS stiffness combats unwanted resonances and vibrations and equally important, the new clamp design makes the installer's job easier and faster!

    CI Home H55-LCR Specifications

    Design 3-driver, 2-way in-wall left/center/right, ABS chassis & mounting clamps

    Crossover 2nd-order electro-acoustic at 2.5 kHz

    Frequency Response On-Axis ±2 dB from 75 Hz - 20 kHz

    Frequency Response 30° Off-Axis ±2 dB from 75 Hz - 18 kHz

    High Frequency Driver 3/4" (1.9cm) PTD™ dome

    Midrange Frequency Driver Two 5.5" (14cm) mineral-filled polypropylene cones

    Low Frequency Extension 60 Hz

    Sensitivity Room / Anechoic 89 dB / 85 dB

    Impedance Compatible with 8 ohms

    Suitable Amplifier Power Range 15-100 W

    Maximum Input Power 70 W

    Finishes White, paintable grille

    Weight 5.9 lbs. (2.7 kg)

    Overall Dimensions 12.625" (32.1cm) Height
    9.25" (23.5cm) Width

    Cut-Out Dimensions 8.25" (20.9cm) Height
    11.625" (29.5cm) Width

    Minimum Mounting Depth Depth required is the distance between 1/2" drywall, or similar material. 2.75" (7cm)

      California customers: Please click here for your Proposition 65 warning.

      You recently viewed

      Clear recently viewed