Paradgm PDR W100 Wireless Subwoofer
The arrival of the wireless PDR-W100 allows you to place your PDR subwoofer in the location where it will deliver the very best bass, not simply in a place convenient for plug-in to a wall outlet. For those annoyed by cable clutter or unsightly wiring along walls or baseboards, PDR-W100 is an ideal neat freak option!
The PDR-W100 Wireless Transmitter is included when you purchase a PDR-W100 sub. Its digital self-sensing signal automatically adjusts for best wireless connection while monitoring the integrity of the data stream. It offers a sampling frequency of 48 kHz, 16 . The transmitter has an unobstructed range of 50’ / 15 m.
PDR Series subwoofers offer superb definition and deep bass impact for music and home theater. These high-performance designs use built-in high-performance, high-power amplifiers with high-current output, along with high-power drivers, to deliver stunning bass performance that represents completely unprecedented value. Their sleek lifestyle design simply adds to the reason they are the best selling budget subwoofers in the world!
• Auto On/Standby
• Subwoofer Level
• Subwoofer Cut-Off Frequency (continuously variable 35 Hz – 150 Hz); Bypass Option
• Sub/Sat Phase Alignment (continuously variable 0° to 180°)
• Line-level Inputs
Built-In High-Power, High-Performance Discrete Amplifiers provide tremendous high-current, low-distortion power: 360 watts Dynamic Peak / 120 watts RMS.
Superior Reinforced Polymer-Composite Cones provide articulate and extended bass performance with tremendous output and superb control.
High-Velocity Low-Noise Dual Rear Ports with critically flared openings ensure maximum bass efficiency and minimum turbulence distortion.
SpecsPDR W100 Specifications
Design Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in amplifier
Amplifier 360 watts Dynamic Peak / 120 watts RMS
Amplifier Features Auto-On / Standby, soft clipping
Low Pass Filter Frequency Variable 35 Hz - 150 Hz; Bypass Option
Low Frequency Driver 254-mm (10 in) reinforced polymer-composite cone, 38-mm (1-1/2 in) voice-coil
Low Frequency Extension 29 Hz (DIN)
Sub / Sat Phase Alignment Variable 0° - 180°
Finishes Black Ash
Inputs Two RCA (L/R-Mono) for L/R Line-Out or Sub-Out / LFE-Out of receiver, processor or other line-level source
Weight 29 lbs. (13.2 kg)
Dimensions HxWxD Includes grilles and feet 15.5" × 13.125" × 15.25"
(39.4cm × 33.3cm × 38.7cm)
Wireless Receiver pt-1
2.4 GHz Latency 13 ms Maximum Wireless Range 15' / 50m Sampling Rate 48 kHz, 16 bits Subs Per Transmitter 1