Panamax MD2-AV AC and RCA Signal Line Surge Protection Factory Refurbished
Exclusive Protect or Disconnect™ Circuitry
Safeguards equipment against all surges. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment.
Noise Filtration Circuit
EMI/RFI Filtration Circuitry for Clean, Unimpeded Power.
RCA Line Level Protection
Protects equipment from electrical surges that travel over low voltage RCA lines.
EMI/RFI Filtration Circuitry for Clean, Unimpeded Power.
Protect-or-Disconnect™ Circuitry
3 Circuits RCA Input/Outputs.
Removable, paintable cover ensures seamless fit with any décor.
Includes module to deliver signal from source component to MD2-AV to remote AV equipment.
Two Diagnostic Lights (LED) Power On/Protection OK and Line Fault.
Thin Profile - Only 1.5" inches deep.
Convenient display feature; turn cover around to hide diagnostic lights.
Specs
General
FamilyDirect Plug Ins
Line Voltage120 (Volts)
BlueBOLT EnabledNo
Number of Outlets2
Outlet DescriptionsBoth outlets filtered and surge protected
ComplianceC-UL (UL standard #1449)
USB ChargingN/A
Low Voltage TriggerN/A
AC Power CordN/A
Dimensions3.25" W X 1.625" D X 5.25" H
Weight0.65 lbs
AC Protection
AC Protection TechnologyProtect or Disconnect
L-N, L-G, N-G Protection Modes
Thermal Fusing
Automatic Voltage ShutoffNo
Undervoltage ShutoffN/A
Over-Voltage ShutoffN/A
Maximum Current Rating15 (Amps)
Initial Clamping Level200V Peak
Filtration
Filtration TechnologyRFI/EMI Filtration
Filtration Rating50 dB @ 100 kHz - 1 MHz
Signal Line Protection
Signal Line Protection3 RCA
Shipping Info
Length4.9 (Inches)
Width3 (Inches)
Height6.4 (Inches)
Weight0.9 (Lbs)
Unit of MeasureEach
UPC050616008808
Master Pack Qty24
Other Specifications
Voltage Protection Rating (UL 1449 3rd Edition, 3,000A)L-N 400V, L-G 500V, N-G 400V
Thermal FusingYes
Single Pulse Energy Dissipation1350 Joules
Response Time<1 ns
Peak Impulse Current60,000 A
Nominal Discharge Current3,000 A
A/V Line-Level Specifications
ConnectorsRCA, Female
Clamping Level8V
Attenuation0.06dB from 10Hz-6MHz
