Skip to content

Musical Fidelity M6si Chrome Edition Integrated Amplifier

UPC: 9120097827357
$4,499.00

SKU M6SiChromeEdition

Product Qualifies for FREE Ground Shipping

Musical Fidelity M6si Chrome Edition Integrated Amplifier

M6si Chrome Edition - Overview

At Musical Fidelity we think of the M6si as being a destination product. The M6si offers such excellent performance, facilities and power that unless you are seeking the most exotic high-end sound quality you would never need another amplifier. We believe it’s that good & it is now available in a special chrome finish.

Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework. This special edition is equipped with selected components to ensure the best sound experience possible. The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.

The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease. In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are. We love the M6si and hope that you do too.

M6si In Brief
• Selected components
• 220WPC
• Excellent technical performance
• Amazing load driving ability, unconditional stability will drive any loudspeaker
• Wide range of useful inputs including asynchronous USB and switchable MM / MC Phono
• Preamp output
• Internally it is a separate preamp with two independent monobloc power amps; effectively a separates system in a box
• Excellent, hunky build quality

    Specs

    Amplifier:
    Power output: 220 Watts per channel into 8 Ohms
    THD (+ noise): <0.007 % typical 20Hz - 20 kHz Signal
    to Noise Ratio: >107dB ‘A’ - weighted Frequency Response: +0, –0.1dB, 10Hz to 20 kHz
    Inputs:
    4x Line Level RCA
    1x Line Level XLR Balanced
    1x USB type ‘B’ connector - asynchronous
    data stream at up to 24-bit/96kHz
    1 x switchable phono input
    Trigger in
    Phono Input:
    Sensitivity: 3mV nominal (MM), 0.4mV nominal (MC)
    Signal / noise ratio: >84dB ‘A’-weighted
    Input impedance: 47k Ohms (MM and MC)
    Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz
    Outputs
    Trigger out
    Fixed, line level output
    Variable, preamp output
    General:
    Dimensions - WxHxD (mm): 440 x 125 x 400
    Weight (unpacked / packed): 16.6 kg/ 21.3 k

          Customer Reviews

          No reviews yet Write a review