WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Monitor Audio WT280-IDC Trimless 200 8" Pivoting In-Wall Speaker (Each)

UPC: 5060028972494
Call for Availability
$550.00

SKU WT280-IDC

Product Qualifies for FREE Ground Shipping

Features an 8-inch C-CAM® bass driver and a pivoting IDC module, housing a 4-inch C-CAM RST® inverted midrange driver and a 1-inch C-CAM gold dome tweeter. True 3-way design provides rich midrange detail, higher system output, greater power handling, and superior vocal intelligibility and sound localisation. Optimum imaging and set-up are established via the pivoting IDC, high frequency (+3dB /0dB / -3dB) level adjustment, and boundary compensation (on / off) controls.

  • Unique IDC dual concentric mid-range/ HF module offering up to 18 degrees of pivot in all directions. Easily directed during post install set-up.
  • C-CAM drivers throughout, providing coherent tonal balance and sonic signature across the entire audio frequency spectrum.
  • Special Inverted C-CAM RST profile mid-range cone provides improved dispersion pattern.
  • True 3-way designs. 
  • High overall efficiency.
  • High frequency level adjustment (+/- 3dB). 
  • Boundary compensation control. 
  • Audio match with CP range 200 models and Silver Series hi-fi speakers.
  • Our innovative Tri-Grip® fixing system is easier to install than conventional clamping schemes but provides three times the surface area and a better surface seal, maximising bass response and mid-range clarity.
  • Magnetic and easily removable steel grille.
  • All models are paint-able to blend with the living environment. Additional scrim material is provided for trouble free painting. 
  • All models are splash and humidity proof for installation in shower rooms or pool areas.
  • All models feature dust protection covers that are designed to prevent the ingress of dirt or dust into the driver and crossover.
  • Specs
    Frequency Response
    45 Hz - 30 kHz

    Impedance (Nominal)
    6 Ohms

    Sensitivity (1W@1M)
    90 dB

    Maximum SPL
    111.6 dBA

    Power Handling (RMS)
    150 W

    Recommended Amp Requirements
    40 - 150 W

    Drivers Unit Complement
    8” C-CAM® cone bass driver, pivoting IDC module housing: 4” C-CAM RST® inverted mid range driver 1” C-CAM gold dome tweeter

    Adjustment Controls
    HF Level Switch (+3dB / 0dB / -3dB) Boundary Compensation Switch

    Overall Dimensions:(including grille) (H x W)
    441 mm x 288 mm (17 3/8 inch x 11 5/16 inch)

    Overall Depth:(including grille)
    97.5 mm (3 13/16 inch)

    Cut Out Dimensions:(H x W)
    387 mm x 234 mm (15 1/4 inch x 9 3/16 inch)

    Mounting Depth
    93 mm (3 11/16 inch)

    Fixing Type
    6 position Tri-Grip® dog leg fixings

    Construction Material
    Mineral Filled ABS Plastic

    Pre-Construction Bracket
    WB8 (Green)

    Weight
    3.6kg (7lb 14oz)

      California customers: Please click here for your Proposition 65 warning.

      You recently viewed

      Clear recently viewed