Marantz SR6013 9.2-Channel 4K Ultra HD AV Receiver with HEOS and Panamax MR4300 Power Conditioner Bundle

by Marantz
UPC: 699927211752
Save 43%
$1,848.95
$1,049.00

SKU SR6013MR4300Bundle

Marantz SR6013 9.2-Channel 4K Ultra HD AV Receiver with HEOS and Panamax MR4300 Power Conditioner Bundle

This Bundle Includes the Following:

QTY: 1 Marantz SR6013 9.2-Channel 4K Ultra HD AV Receiver with HEOS

QTY: 1 Panamax MR4300 Power Conditioner and Surge Protector

 

Specs
Marantz SR6013 Specifications:

  • 9.2 channel AV Receiver with 110W per channel (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
  • Works with Amazon Alexa
  • Built-in Wi-Fi with 2.4GHz/5GHz dual band support; built-in Bluetooth
  • 4K/60 Hz full-rate pass-through, Dolby Vision compatibility, HDR, HLG and BT.2020
  • 8 HDMI inputs (incl. 1 front) with full HDCP 2.2 support; 3 HDMI outputs
  • Analog to HDMI conversion and full rate 4K Upscaling
  • eARC (Enhanced Audio Return channel) will be enabled via a firmware update as well.
  • Dolby Atmos, DTS:X (up to 7.1.4 with an external 2ch amplifier), and DTS Virtual:X for height virtualization effects.
  • AKM AK4458 32-bit D/A converters; HDAM; Current Feedback circuitry; Hybrid PLL Clock Jitter Reducer
  • Built-in HEOS Wireless Multi-Room Audio Technology and Alexa voice control
  • AirPlay2, Bluetooth, Internet Radio, Spotify Connect, Pandora, SiriusXM, Amazon Music, TIDAL, Deezer and more
  • High Resolution DSD (2.8/5.6MHz), FLAC, ALAC and WAV support
  • Audyssey MultEQ XT32, Dynamic Volume and Dynamic EQ, LFC, Sub EQ HT
  • Color-coded speaker terminals, Setup Assistant, Marantz AVR Remote App
  • Intelligent ECO mode with off/on/auto setting  

  • Main Unit

    Output Power 110 W per channel @ 8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2 channels driven
    Channels 9.2
    Input Sensitivity Analog: 200 mV
    Frequency Response Analog: 10 Hz to 100 kHz (+1, -3 dB, Direct mode)
    Signal to Noise Ratio Analog: 100 dB (IHF-A weighted, Direct Mode)

    Video

    Upscaling Yes, to near-4K
    Pass-Through 4K/60p, 4:4:4, HDR, and BT.2020
    HDCP Version 2.2
    Input/Output Level and Impedance Composite Video: 1 Vp-p, 75 Ohms
    Component Video, Y Signal: 1 Vp-p, 75 Ohms
    Component Video, PB/CB and PR/CR Signals: 0.7 Vp-p, 75 Ohms
    Frequency Response Composite Video: 5 Hz to 10 MHz (0, -3 dB)
    Component Video: 5 Hz to 60 MHz (0, -3 dB)
    Tuner Section

    Tuner Bands AM / FM
    Reception Frequencies AM: 520 to 1710 kHz
    FM: 87.5 to 107.9 MHz
    Sensitivity AM, Effective: 18 μV
    FM, Effective: 1.2 μV (12.8 dBf)
    50dB Sensitivity Mono/Stereo FM, Mono: 2.8 μV (20.2 dBf)
    S/N Ratio FM, Mono: 70 dB (IHF-A weighted, Direct Mode)
    FM, Stereo: 67 dB (IHF-A weighted, Direct Mode) Distortion FM, Mono: 0.7% (1 kHz)
    FM, Stereo: 1.0% (1 kHz)

    Connectivity

    Bluetooth Version: 3.0 + EDR (Enhanced Data Rate)
    Transmission Power: Class 1
    Maximum Communication Range: Approximately 98.4' (30 m) in line of sight
    Frequency Band: 2.4 GHz
    Modulation Scheme: FHSS (Frequency-Hopping Spread Spectrum)
    Supported Profiles: A2DP (Advanced Audio Distribution Profile) 1.2, AVRCP (Audio Video Remote Control Profile) 1.5
    Corresponding Codec: SBC
    Transmission Range (A2DP): 20 Hz to 20 kHz
    Wi-Fi Radio Frequency: Dual-band (2.4 / 5 GHz)
    Network Type: IEEE 802.11a/b/g/n
    Security: WEP 64-bit, WEP 128-bit; WPA/WPA2-PSK (AES); WPA/WPA2-PSK (TKIP)

    Inputs

    8 x HDMI (1 front)
    2 x optical TOSLINK
    2 x digital coaxial
    2 x component video
    4 x composite video (1 front)
    7 x stereo RCA audio (1 front, 1 phono with ground screw)
    1 x USB (front)
    1 x 7.1-channel analog in

    Outputs

    2 x HDMI (1 with ARC)
    1 x composite video
    1 x component video
    2 x subwoofer pre-out
    1 x stereo RCA Zone 2
    1 x 7-channel analog pre-out

    Other Ports

    1 x FM antenna

    1 x AM antenna
    1 x Ethernet
    1 x 1/8" / 3.5 mm IR in
    1 x RCA remote in
    1 x RCA remote out
    1 x 1/8" / 3.5 mm 12 VDC, 150 mA out
    1 x RS-232C DE9
    2 x Bluetooth/Wi-Fi antennas
    1 x 1/8" / 3.5 mm setup mic in (front)
    1 x AC in
    Speaker Connectors 11 x binding post pairs
    HDMI CEC Yes
    File Support WMA, MP3, WAV, MPEG-4 AAC, FLAC, Apple Lossless, DSD

    General

    Power Consumption (Standby) 0.2 W
    Power Requirements 120 VAC, 60 Hz
    Dimensions (W x H x D) 17.38 x 6.38 x 15.38" / 44.13 x 16.19 x 39.05 cm
    Weight (Approximate) 28.13 lb / 12.76 kg

    Panamax MR4300 Specifications:

    AC Protection

    Voltage Protection Rating (UL 1449 3rd Edition, 3,000A) 330V
    Under-voltage shutoff 100V ±2V
    Thermal Fusing Yes
    Single Pulse Energy Dissipation 1575 Joules
    Response Time < 1ns
    Protection Modes L-N, L-G, N-G
    Protect or Disconnect Circuitry Yes
    Over-voltage shutoff 135V ±2V
    Nominal Discharge Current (UL 1449 3rd Edition) 3,000A
    Maximum Current Rating 15A (1800W)
    Line Voltage 120V, 50/60Hz
    Initial Clamping Level 200V Peak, 141VRMS
    Automatic Voltage Monitoring Circuit

    Linear Level 3 Noise Filtration

    Bank 1
    -70dB min. @ 100kHz
    -65dB min. @ 250kHz
    -45dB min. @ 500kHz
    Max filtration: -80dB @ 150kHz
    Bank 2 - High Current, Low Impedance
    -50dB min. @ 100kHz
    -60dB min. @ 250kHz
    -45dB min. @ 500kHz
    Max filtration: -63dB @ 250kHz

    General

    Weight 6.5 lbs.
    Rack Ears Included
    Dimensions 6”l x 17”w x 1.75”h, 2.19”h with feet

    LAN Protection

    Wires Protected 8-Wires
    Jacks RJ-45
    Compatibility 10/100/1000bT
    Clamping Level 62V ± 6V @ 1 mA

    TEL Protection


    Wires Protected 2 Wires, 1 Pair (4, 5)
    Jacks RJ-11
    Fuseless/Auto-Resetting Yes
    Clamping Level 260V

    Universal Coax Protection

    Shielded Yes
    Insertion Loss < 0.5 dB
    HD 1080 i/p Ready Yes
    Frequency Range 0 MHz - 2.2 GHz
    Connections Female "F", Gold Plated
    Clamping Level 75V
    Bidirectional Yes

      You recently viewed

      Clear recently viewed