Denon PMA-60 Integrated Stereo Amplifier with DAC and Bluetooth

by Denon


Denon PMA-60 Integrated Stereo Amplifier with DAC and Bluetooth


  • High-efficient 25W/ch Class D amplifier
  • 4-ohm stable
  • Asynchronous USB type B input supporting high resolution playback, including 11.2 DSD native
  • Two toslink and one coaxial digital input to support 24-bit/192kHJz signals
  • Bluetooth 3.0 audio with aptX and NFC
  • Supports connection of up to 3 Bluetooth devices simultaneously.
  • Exclusive Denon AL32 32-bit digital processing
  • High-precision master clock eliminates jitter from digital audio inputs
  • Noise isolation circuit
  • Analog stereo input
  • Full range subwoofer output
  • 1/8" headphone output with front panel volume control
  • Full-function IR remote
  • Can be positioned horizontally or vertically
  • Aluminum enclosure with solid feet
  • Detachable power cord
  • Specs
  • Output performance: Both channels driven
  • Rated output
    • 25W + 25W (8Ω/ohms, 1kHz, THD 0.1%)
    • 50W + 50W (4Ω/ohms, 1kHz, THD 0.1%)
  • Output connectors
    • Speaker: 4 - 16Ω/ohms
    • Headphones: 6.3mm jack
  • Total harmonic distortion: 0.004% (Digital In, rated output -3dB, 8Ω/ohms, 1kHz)
  • Signal-to-noise ratio: 110dB (Digital In, 25W, 8Ω/ohms, 1kHz, IHF-A)
  • Digital input signal
    • Audio formats: Digital audio interface (Linear PCM)
    • Coaxial input: 0.5Vp-p/50Ω/ohms
    • Optical input: More than -27dBm
    • Wavelength: 660nm
  • Input sensitivity/impedance: Aux 0.13V/22kΩ/kohms
  • Communication system: Bluetooth version 3.0
  • Transmission power: Maximum 2.5mW (Class2)
  • Maximum communication range: Approximately 10m in line of sight
  • Frequency band: 2.4GHz band
  • Modulation method: FHSS (Frequency-Hopping Spread Spectrum)
  • Supported profiles: A2DP 1.3/AVRCP 1.5
  • Supported codecs: aptX Low Latency/AAC/SBC
  • Power supply: AC230V, 50/60Hz
  • Power consumption: 35W
  • Power consumption in standby mode: 0.2W

    You recently viewed

    Clear recently viewed