Skip to content

Parasound ZoneMaster Model 650 6 Channel Amplifier

UPC: 791084200300
Call for Availability
$1,350.00

SKU ZoneMaster650

Product Qualifies for FREE Ground Shipping

  • Our ZoneMaster models are very similar in their feature sets, differing mainly in size and number of channels.
    Looking for more channels Try the 1250. Fewer 450 or 250.
  • Universal amplifier for applications from 50 to 200 watts
  • 12 speaker connections (A and B outputs for all 6 channels)
  • High current for stable operation at 2 Ohms
  • Channel pairs are bridgeable for up to 200 watts @ 4 Ohms
  • Class AB input stage plus premium Class D power stage
  • Independent audio sensing triggers, one for each zone
  • 3 Independent 12 volt trigger inputs, one for each zone
  • Looping 12 volt trigger outputs for each zone
  • Master 12 volt trigger input to turn all zones on-off
  • Speaker level input for expanding systems w/out pre out jacks
  • One bus input can be routed to any zone
  • Bus loop output jacks for passing audio to another amp
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for all six channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.5 watt standby power consumption meets Energy Star & EU specs
  • Compact 1U chassis
  • 1U rack mounting hardware is included in box
  • Specs

    Power Output
    RMS, All Channels Driven (20 Hz - 20 kHz)

    50 watts x 6 @ 8
    90 watts x 6 @ 4 or 2
    160 watts x 3 @ 8 (Bridged)
    200 watts x 3 @ 4 (Bridged)

    Frequency Response
    10 Hz - 60 kHz, +0/-3 dB

    Total Harmonic Distortion
    < 0.05% at typical listening levels
    < 1.0% at full power

    Interchannel Crosstalk
    70 dB at 20 kHz

    Input Sensitivity:
    700mv = Full output (50 Watts @ 8 )
    Total Gain = 29 dB (Level controls set to Maximum)

    S/N Ratio
    > 112 dB, input shorted, IHF A-weighted

    DC Trigger Requirements
    +9 Vdc to +12 Vdc, 2 mA

    Audio Trigger Requirements
    2 mV Audio Signal

    AC Power Requirement:
    750 Watts Maximum
    50 Watts Typical
    20 Watts Idle (All Zones on)
    8 Watts Idle (One Zone on)
    0.5 Watts Standby
    110-130 VAC 60 Hz or 220-255 VAC 50 Hz
    Note: AC mains voltage is set only by qualified electronics technician.

    Dimensions:
    Width: 17.25" (437 mm)
    Depth: 14.25" (362 mm)
    Height, with feet: 2.5" (64 mm)
    Height, without feet: 1.75" (45 mm), 1U

    Weight:
    Net: 12 lbs (5.5kg)
    Shipping: 18 lbs (8.2kg)