The W200 is a subwoofer with a potent 220W DSP controlled Class D amplifier. It powers a side-firing 10 long throw C-CAM bass driver equipped with a huge, dual stack magnet system. Complementing the active driver is a 10 Auxiliary Bass Radiator (ABR). Select music , movie and impact pre-set response curves using a back-panel switch.
C-CAM cone technology
10 flat ABR (Auxiliary Bass Radiator)
Tuned for tight, fast bass punch
220watt class-D power amplifier
DSP providing accurate filter characteristics
Advanced limiters designed to ensure the W200 never loses control.
3 x pre-set bass modes (Music, Movie, Impact)
12V trigger input ensures W200 switches on and off with other equipment.
Heavy duty MDF construction
Discreet black cloth finish.
Specs
System Format
Active sub-woofer system - Auxilary (ABR) loading. 18mm MDF cabinet (CARB2 approved)
Low Frquency Limit
30Hz (-6dB)
Upper frequency limit
Variable 40 - 120Hz @ 24dB/Octave
Amplifier Power Output
220 watts @ 1% THD+N
Amplifier Classification
Class - D amplifier with Switch mode power supply (SMPSU)
Bass EQ Switch
Music / Movie / Impact
Phase Control
0-180 degrees
Auto Sensing
Line Level >3.5mmV
Input Level Requirements
Standby after approx. 20 minutes if no signal sensed
Driver Compliment
1 x 10" (250mm) C-CAM Long Throw Driver
1 x 10" (260mm) Auxilary bass radiator
Input Impendence
> 20K Ohms
Mains input voltage
100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present)
Dimensions (H x W x D)(Including grilles and feet)
420 x 385 x 385 mm / 169/16 x 163/16 x 163/16 Inches
Connections
Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack)
12v Trigger input
5 12v via 3.5 via mono mini-jack socket
Power Consumption
200 watts / 0.5 watts in Standby (ErP approved)
Weight
15.96Kg (35lb, 2oz)
