{"title":"Dynaudio Emit Series","description":null,"products":[{"product_id":"dynaudio-emit-10-bookshelf-speaker-pair","title":"Dynaudio Emit 10 Bookshelf Speaker (Pair)","description":"\u003cp\u003e\u003cstrong\u003eHi-fi starts with Emit\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEmit 10 is a compact two-way stand mount speaker that uses technology derived from our ultra-high-end Confidence, Contour i and Evoke series. It’s the ideal model for smaller rooms and satellite channels in a home cinema system.\u003cbr\u003e\u003cbr\u003eDesigned and engineered at Dynaudio Labs in Denmark, Emit 10 has been developed and tuned by the same minds behind our award-winning high-end families – right down to the smallest detail.\u003cbr\u003e\u003cbr\u003eUnder the hood, you’ll find a 14cm MSP (Magnesium Silicate Polymer) mid-bass unit. MSP is a material we developed ourselves, and have been using for decades. It provides exactly the right combination of lightness, stiffness and damping for super-fine control without loss of power – essential when a driver is reproducing both low-bass and crucial midrange frequencies.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLegendary engineering\u003c\/strong\u003e\u003cbr\u003eEmit 10’s mid\/bass driver is derived from the Esotec+ in the successful Evoke series, and sports an all-new surround and double magnet system for extended throw (meaning the cone can move back and forth more). This improves the frequency response and dynamics at lower frequencies, while retaining crystal-clear midrange performance. That means you’ll hear what you want from a powerful rhythm section, plus guitars, vocals and more – all without distortion at louder volumes.\u003cbr\u003e\u003cbr\u003eYou’ll notice that the dust-cap isn’t simply glued on. It’s part of the playing surface of the cone. The little dashed line around its edge – the balance rib structure – is bonded directly to the 38mm voice-coil behind it. It’s an incredibly strong connection with the motor, which means more of the coil’s motion energy is transferred to the diaphragm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBehind the cone\u003c\/strong\u003e\u003cbr\u003eThe voice-coil itself is made of copper-clad aluminum wire. Aluminum is light, which gives the driver a fleetness of foot you might not find elsewhere, while the copper coating increases conductivity for more power. It’s a winning combination for detail and punch.\u003cbr\u003e\u003cbr\u003eA high-quality double ferrite magnet system provides the power. It’s a stacked design to keep it compact, but it serves another purpose: using two magnets means our engineers were able to control the magnetic flux, directing it back to the voice-coil, where it’s needed the most. (We can’t break the laws of physics, but we do rather like to bend them a bit.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh-quality Cerotar tweeter\u003c\/strong\u003e\u003cbr\u003eThe Cerotar tweeter is exactly what you’ll find in Evoke. It’s based on the one we’ve used in our award-winning Esotar Forty anniversary tweeter and the incredible Esotar3, which you’ll hear in Heritage Special and Confidence.\u003cbr\u003e\u003cbr\u003eIt’s a 28mm fabric soft-dome unit with our special DSR (Dynaudio Secret Recipe) coating. Why fabric soft-dome tweeters? They convey all the detail and openness you could wish to hear from your recordings without subjecting you to unwanted fatigue over longer listening sessions. These are speakers you can (and, we hope, will) listen to late into the night.\u003cbr\u003e\u003cbr\u003eBehind the dome sits our much-talked-about Hexis device. It’s an ingenious dimpled inner dome that sits directly behind the playing surface and shapes airflow to optimize the frequency response and eliminate unwanted resonances. That means the diaphragm can move more precisely, so you’ll hear even more detail.\u003cbr\u003e\u003cbr\u003eIt’s driven by a strontium carbonate Ferrite+ ceramic magnet system for more sensitivity, improved clarity and a natural, dynamic response.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe crossover\u003c\/strong\u003e\u003cbr\u003eEmit 10’s crossover was designed by the same engineers that worked on Heritage Special and our Core range of professional studio reference systems. It uses a first-order design for the tweeter and a second-order topology for the mid\/bass driver. We could’ve used a one-size-fits-all circuit, but that would mean compromising performance – and we’d much rather spend a little extra time to do it properly. We think you’ll agree when you hear them.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFinishing touches\u003c\/strong\u003e\u003cbr\u003eRound the back, you’ll see the bass-reflex port. It’s a dual-flared design to reduce air turbulence and minimize unwanted ‘chuffing’, especially with deep notes. We’ve even tuned the internal damping material (yes, that’s possible). It’s measured down to the gram for the perfect combination of damping and openness.\u003cbr\u003e\u003cbr\u003eThe cabinets are made from 18mm MDF, covered in beautiful custom laminate finishes. There are three available: Black, White and Walnut. All come with magnetic grilles, too – so if you want a different look, or someone small in your house is obsessed with poking and prodding your speakers with sticky fingers, you’re well covered.\u003cbr\u003e\u003cbr\u003eEmit 10 is the ideal way to take your next step into the world of hi-fi. Cutting-edge technology, simple Danish design and unmatched performance at this level. What’s not to like?\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Black Satin","offer_id":39826541052015,"sku":"Emit10BlackPair","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Walnut Wood","offer_id":39826541084783,"sku":"Emit10WalnutPair","price":599.0,"currency_code":"USD","in_stock":true},{"title":"White Satin","offer_id":39826545410159,"sku":"Emit10WhitePair","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0140\/4859\/1926\/files\/USap4r-g_6e4fe806-c579-4d14-85ce-d75a2022c992.png?v=1788264245"},{"product_id":"dynaudio-emit-20-bookshelf-speaker-pair","title":"Dynaudio Emit 20 Bookshelf Speaker (Pair)","description":"\u003cp\u003e\u003cstrong\u003eHi-fi starts with Emit\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eJaw-dropping performance from powerful standmounters\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEmit 20 is a high-performance standmount speaker derived from our Evoke, Contour i and Confidence series. It gives a stellar combination of detail and punch for small to medium-sized rooms.\u003cbr\u003e\u003cbr\u003eWe don’t use the term ‘authentic fidelity’ lightly. With Emit 20, that’s exactly what you’ll get: a premium audiophile speaker that astonishes at the price.\u003cbr\u003e\u003cbr\u003eIt might be an ‘entry-level’ model, but Emit 20 is still crammed with technology that you’ll find in our other families, right up to the flagship Confidence range and our Core professional reference monitors. Make no mistake: you’ll experience performance you simply wouldn’t expect at this level.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMid\/bass power and control\u003c\/strong\u003e\u003cbr\u003eEmit 20 uses an 18cm MSP (Magnesium Silicate Polymer) woofer, based on the one we’ve used in the Evoke series. MSP is a material we developed in-house, and have used for many years on our most renowned models. The cone itself is a one-piece design; the dust-cap is moulded as part of the playing surface, which gives it a solid connection to the voice-coil that moves it back and forth. You’ll hear that connection as supreme control and detail in the low and midrange frequencies.\u003cbr\u003e\u003cbr\u003eThe voice-coil itself is aluminium, wound onto a two-layer glass-fibre former. We’ve a long history of using aluminium wire in our voice-coils – and for good reason. It’s light, so doesn’t impede fine movement, and we can get more windings on the former for a given length of wire. That means more ‘BL’, or magnetic power. More power means more punch. We’ve boosted that further, too, by coating the aluminium wire in copper.\u003cbr\u003e\u003cbr\u003eCombined with the stacked ferrite magnet system and new surround, that gives Emit 20’s long-throw mid\/bass driver all the bass power you could want, even at high volumes, combined with amazing control over midrange frequencies (where instruments such as guitars, vocals and violins reside).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh-level tweeter performance\u003c\/strong\u003e\u003cbr\u003eEmit 20 uses the Cerotar tweeter directly from Evoke. It’s a 28mm soft-dome design that includes the ingenious Hexis inner-dome device. The coated fabric dome delivers sweet-sounding high frequencies – all the openness and detail the artists want you to experience in their recordings – while the Hexis smooths the frequency response and reduces unwanted resonance for surprising clarity.\u003cbr\u003e\u003cbr\u003eCerotar is powered by a powerful Ferrite+ strontium carbonate ceramic magnet system. It gives the tweeter all the power it needs to play loud without breakup while maintaining all the nuance you could want. Even at neighbor-bothering levels.\u003cbr\u003e\u003cbr\u003eAnd because it uses technology from our top-of-the-range Core pro reference speakers (whose users need to listen intently for long periods), you won’t get tired when you’re in the middle of a long session.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInside the crossover\u003c\/strong\u003e\u003cbr\u003eThe mid\/bass driver and tweeter are marshalled by a custom-designed crossover from the same team who brought you Heritage Special and Core. Our engineers used a hybrid first- and second-order topology for the tweeter and woofer respectively, giving them exceptional control over each driver’s behavior. It means you’ll hear what the artist wants you to hear, without compromise.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAn impressive finish\u003c\/strong\u003e\u003cbr\u003eEmit 20 comes in three custom-designed laminate finishes – Black, White and Walnut – that beautifully complement the cabinets’ clean Scandinavian design (conceived in-house at our headquarters in Denmark). Black magnetic grilles come as standard in the box.\u003cbr\u003e\u003cbr\u003eWe’ve even lavished attention on the cover-rings, which hide the mounting screws. They’re one-piece molded with the surface finish embedded in the material, which eliminates the need for lacquer – so they won’t degrade over time.\u003cbr\u003e\u003cbr\u003eIf you want an audiophile-level standmount speaker for a stereo set-up in medium-size room, or fancy a little more ‘oompf’ from your rear surround channels, Emit 20 is the ideal choice.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Black Satin","offer_id":39826726486127,"sku":"Emit20BlackPair","price":1049.0,"currency_code":"USD","in_stock":true},{"title":"Walnut Wood","offer_id":39826726518895,"sku":"Emit20WalnutPair","price":1049.0,"currency_code":"USD","in_stock":false},{"title":"White Satin","offer_id":39826726551663,"sku":"Emit20WhitePair","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0140\/4859\/1926\/files\/vlUzFlvE_6834e9b5-66c2-4454-b20e-635ef92e0bff.png?v=1788264501"},{"product_id":"dynaudio-emit-30-floorstanding-loudspeaker-pair","title":"Dynaudio Emit 30 Floorstanding Loudspeaker (Pair)","description":"\u003cp\u003e\u003cstrong\u003eHi-fi starts with Emit\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCompact floorstanders for stereo and surround\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEmit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms.\u003cbr\u003e\u003cbr\u003eIf you’re looking for a little more power from your system, you’ve found it. Emit 30 is a compact two-and-a-half-way speaker designed to impress whether it’s used as a stand-alone stereo pair or as part of a 5.1-channel (or more) home cinema.\u003cbr\u003e\u003cbr\u003eLike its little brother, Emit 10, it uses 14cm MSP woofers similar to those used in the Evoke series – this time doubled-up in each speaker for more low-frequency muscle, plus midrange clarity and punch. MSP stands for Magnesium Silicate Polymer. It’s a material we developed in-house for our woofer cones, and have used for decades – including on our most-lauded high-end models. MSP provides precisely the right combination of lightness, stiffness and damping (one we’ve tuned and honed over the years) to deliver control and outright power exactly where it’s needed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePremium woofer technology\u003c\/strong\u003e\u003cbr\u003eThe cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.\u003cbr\u003e\u003cbr\u003eEach woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family.\u003cbr\u003e\u003cbr\u003eThe target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh-performance Cerotar tweeter\u003c\/strong\u003e\u003cbr\u003eWhile the twin 14cm mid\/bass units deal with the… well, midrange and bass… the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed.\u003cbr\u003e\u003cbr\u003eThe 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminum voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are).\u003cbr\u003e\u003cbr\u003eThe bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimize unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimize performance for the speaker’s position relative to the wall.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDanish-designed cabinetry\u003c\/strong\u003e\u003cbr\u003eEmit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fiber, measured down to the gram for exactly the right amount of resonance suppression.\u003cbr\u003e\u003cbr\u003eOn the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any configuration (so if you’re mixing and matching Emit speakers in a home cinema system, you can make them stand out or blend in as you want).\u003cbr\u003e\u003cbr\u003eEmit 30: powerful floorstander performance in a compact package. If you want to take your listening to the next level, they’ll really make your collection sing.\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Black Satin","offer_id":39826737987695,"sku":"Emit30BlackPair","price":1274.25,"currency_code":"USD","in_stock":true},{"title":"Walnut Wood","offer_id":39826738020463,"sku":"Emit30WalnutPair","price":1274.25,"currency_code":"USD","in_stock":true},{"title":"White Satin","offer_id":39826738053231,"sku":"Emit30WhitePair","price":1274.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0140\/4859\/1926\/files\/0V0q8ld0_02d0e484-7fd9-4052-9452-a2c704c0ef64.png?v=1787604652"},{"product_id":"dynaudio-emit-25c-center-channel-speaker-each","title":"Dynaudio Emit 25C Center Channel Speaker (Each)","description":"\u003cp\u003e\u003cstrong\u003eHi-fi starts with Emit - \u003c\/strong\u003e\u003cstrong\u003eA dedicated center channel for multi-channel systems\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt’s been said that the soundtrack is up to 80 per cent of the movie-going experience. And the center speaker is the most crucial part of that. Say ‘hey’ to Emit 25C…\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt could be argued that the center channel is the most important part of any surround-sound system. It’s where the lion’s share of dialogue comes from in a movie, and it’s where the focal point of the music often comes from in a multi-channel mix. It’s crucial to get it right.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eEmit 25C gets it right.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt’s essentially an Emit 30, turned on its side, with the mid\/bass drivers placed either other side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. But that’s not doing it a disservice; quite the opposite. It means you get total consistency between the center speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHigh-quality mid\/bass drivers\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eEmit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the center are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe voice-coils themselves are made from lightweight aluminum wire, clad in a thin layer of copper. We’ve use aluminum here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTop-end performance\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eEmit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimizes airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDanish cabinet design\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eEmit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a center channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEmit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.\u003cbr\u003e\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"Black Satin","offer_id":39826823807087,"sku":"Emit25CBlack","price":599.25,"currency_code":"USD","in_stock":true},{"title":"Walnut Wood","offer_id":39826823839855,"sku":"Emit25CWalnut","price":519.99,"currency_code":"USD","in_stock":true},{"title":"White Satin","offer_id":39826823872623,"sku":"Emit25CWhite","price":599.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0140\/4859\/1926\/products\/ElwYdrag.png?v=1754061646"},{"product_id":"dynaudio-emit-m15c-ultra-compact-center-channel-speaker","title":"Dynaudio Emit M15C Ultra Compact Center Channel Speaker","description":"\u003cp\u003e\u003cstrong\u003eComplete your home theatre set-up in style\u003cbr\u003e\u003c\/strong\u003eThis ultra-compact center-channel is the ideal complement to your multichannel system\u003cbr\u003e\u003cbr\u003eIt s been said that up to 80% of the movie-watching experience is down to its sound. And when you re watching a movie using a surround-sound system, most of it comes from the center channel. We've made sure the M15C can live up to that kind of pressure. Two 11cm MSP drivers and a 28mm soft-dome tweeter handle the business end, while the angled center base lets you position the speaker for listening on a sofa. You can also put it flat on a low sideboard, or fix it to the wall with a special Dynaudio mounting bracket.\u003cbr\u003e\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White Satin","offer_id":52418792751471,"sku":"Emit15CSatinWhite","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0140\/4859\/1926\/files\/g345M15CWH-o_other0.jpg?v=1793150874"},{"product_id":"dynaudio-emit-m30-floorstanding-loudspeakers-pair","title":"Dynaudio Emit M30 Floorstanding Loudspeakers Pair","description":"\u003cp\u003e\u003cstrong\u003eA true powerhouse\u003cbr\u003e\u003c\/strong\u003eAll of our acoustic expertise in a floorstander that doesn't cost the earth (but will make your friends think it did)\u003cbr\u003e\u003cbr\u003eThe M30 floorstanders share the same DNA as our top-of-the-line loudspeakers. Their twin 17cm MSP bass drivers each feature a large 75mm aluminum voice-coil (larger voice-coils mean more windings, which means more control over dynamics, detail and finesse), and their 28mm soft-dome tweeters have rear damping chambers for even greater precision. It s the sort of thing you might expect to see in much higher-priced speakers. And it s the sort of sound you might expect, too.\u003cbr\u003e\u003cbr\u003eThe M30s are designed to work just as well in a stereo set-up as they are in a multichannel system.\u003cbr\u003e\u003c\/p\u003e","brand":"Dynaudio","offers":[{"title":"White Satin","offer_id":52418792980847,"sku":"EmitM30SatinWhitePair","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0140\/4859\/1926\/files\/g345M30WH-F_a73d69c7-694b-4869-b63e-49006034d16b.png?v=1793150818"}],"url":"https:\/\/www.safeandsoundhq.com\/collections\/dynaudio-emit-series.oembed","provider":"Safe and Sound HQ","version":"1.0","type":"link"}