Dynaudio Excite X14A Powered Bookshelf Pair and Parasound ZDac V.2 Dac and Headphone Amplifier Bundle

UPC: 5706937114227
Save 53%
$2,549.00
$1,199.99

SKU ExciteX14AZDacV2BundleBlack

Dynaudio Excite X14A Powered Bookshelf Pair and Parasound ZDac V.2 Dac and Headphone Amplifier Bundle

This Speaker Bundle Consists of the Following:

QTY: 1 Dynaudio Excite X14A Active Powered Bookshelf Speakers (Pair)

QTY: 1 Parasound ZDac V.2 DAC and Headphone Amplifier

QTY: 1 Kimber Kable Tonik Interconnect Cable 1.5 Meters (5 Feet)

Dynaudio Excite X14A High-End Powered Bookshelf Speakers (Pair)

Excite X14A

Smart, compact, active

Powerful digital amplifiers, proprietary Dynaudio drivers and advanced digital sound processing. All you need is a source

If you want to go active, there’s the X14A. It’s based on the passive model, but contains its own powerful digital amplification – one 50W amp for the tweeter and another for the mid/bass driver. We’ve matched each amp specifically to the driver it powers, so you don’t have to worry about system-matching or interconnects, and you can even tell the speakers where they are in the room (in a corner, in free space and so on) to let them fine-tune their sound for you. All you need is a source.

Parasound ZDac V.2 DAC and Headphone Amplifier

Analog volume control for RCA and XLR outputs
Separate volume control for the headphone Jacks
Digital audio connection to LightingTM jack-equipped Apple® devices (USB adapter required)
Updated headphone amp with increased gain
1/4" and 1/8" 24k gold plated headphone jacks
12V input and output triggers
Volume control lock out switch
Premium Analog Devices AD1853 24-bit/192 kHz Digital to Analog Converter IC
All inputs feature jitter reduction and are re-clocked and up-sampled to 422 kHz / 24 bit
USB input for playing music from PC or Mac (driver-less for easy setup)
Asynchronous sample rate conversion for all inputs including the USB input
Works with any format file on your computer up to 96 kHz / 24 bit
Optical and Coaxial digital inputs for use with any standard digital connection
RCA unbalanced and XLR balanced analog outputs
High current headphone output with volume control can drive any headphones from 32 to 600 ohms
Oversized internal toroid power transformer (not a wall wart like many competitors)
Will always power back up to the same input in the event of an AC power outage

Specs

Dynaudio Excite X14A Powered Bookshelf Specifications:

AC power input: 100-230V 50/60Hz

Power Consumption Standby: 0.3W

Power Consumption Max: 94W

Frequency Response (±3dB): 45Hz - 23kHz

Box Principle: Bass Reflex Rear Ported

Crossover: 2 way DSP based

Crossover Frequency: 3000Hz

Crossover Slope: 2nd order

Specification sheet for Excite part 1

Woofer: 14cm MSP

Tweeter: 28mm soft dome

Amplifier Power: 2 x 50W

Weight: 6.4kg / 14lb

Dimensions (W x H x D): 170 x 282 x 246mm 6.7 x 11.1 x 9.7in

Dimensions with feet/grill (W x H x D): 170 x 282 x 262mm 6.7 x 11.1 x 10.3in

Analog Inputs: 1x RCA per speaker (unbalanced) 1x XLR per speaker (balanced)

Parasound ZDac V.2 Specifications:

Supports Incoming Digital Word Lengths:
16 bit - 24 bit

Supports Incoming Digital Sampling Frequencies:

   Opt & Coax: 8 kHz, 11.025 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.

   USB: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Upsampling Frequency:
422 kHz / 24 bit (all inputs)

USB Streaming Controller:
Texas Instruments TAS1020B

Sample Rate Converter:
Analog Devices AD1895

D to A Converter:
Analog Devices AD1853

Headphone Amplifier:
Texas Instruments TPA6120

Frequency Response:
20 Hz to 20 kHz ±0.2 dB

Channel Balance:
< 0.05 dB, 20 Hz - 20 kHz

Channel Separation:
> 95 dB, 20 Hz - 20 kHz

Signal to Noise Ratio:
110 dB, A-weighted

THD + Noise:
< 0.015 %

Audio Output Level, RMS (maximum):
Unbalanced Variable: 2.4 V
Balanced Variable: 4.8 V
Unbalanced Fixed: 2.2 V
Balanced Fixed: 4.4 V

Output Impedance:

Line out: 160 ohms, unbalanced or balanced
Headphone out: 10 ohms

AC Power Requirement:
110-130 VAC 60 Hz or
220-240 VAC 50 Hz (voltage is selected on the chassis bottom)
Operating: 10 watts
Standby: < 1 watt

Dimensions:
Width: 8.5" (220 mm)
Depth: 10" (254 mm)
Height: 2" (51 mm) with feet, 1.75" (45 mm) without feet

Weight:
Net: 5 lbs (2.3kg)
Shipping: 8 lbs (3.7kg)

    You recently viewed

    Clear recently viewed