Marantz SA-10 SACD Player and PM-10 Integrated Amplifier headline the new Marantz 10 Series

Marantz SA-10 SACD Player

Marantz SA-10 SACD Player

The new 10 Series, or as Marantz refers to as the “New Reference” consist of the Marantz SA-10 SACD/CD Player and the Marantz PM-10 Integrated Amplifier. The SA-10 plays SACD, CD, DVD-R/RW and CD-R/RW discs. In addition, high-resolution audio can be played through the SACD-M3 disc drive via CD or DVD. The built in DAC on the SA-10 features new technology referred to as Marantz Musical Mastering, a unique method of digital music processing for maximum musical fidelity. Most remarkably, this technology was previously used only in professional recording studios, and now available on the SA-10.

Marantz PM-10 Integrated Amplifier

Marantz PM-10 Integrated Amplifier

The other half of the Series 10 additions, the Marantz PM-10 is an integrated amplifier with a dual-mono design. This design utilizes separate power supplies for the preamplifier and each of the power amplifier channels, with one transformer dedicated to the preamp to ensure the delicate signals passing through that section of the amplifier aren’t affected by the demands of the high power output stages. Moreover, it contains a dedicated supply for the microprocessor controlling volume adjustment, input selection and so on, ensuring no noise from the control section finds its way in to the audio path.

The Marantz PM-10 also features a purely analog amplifier. This minimizes noise, keeping its amplifiers as pure and clean as possible.

The Marantz SA-10 SACD/CD player/DAC has a retail price of $6,999 and the PM-10 amplifier is $7,999. Be sure to visit our store to checkout these exciting new models.

Marantz SA-10 Specifications:

Frequency Response:
SACD: 2 Hz ~ 60 kHz (-3 dB)
CD: 2 Hz ~ 20 kHz (±1 dB)

S/N Ratio
SACD: 112 d B
CD: 104 dB

Dynamic Range
SACD: 109 dB
CD: 98 dB

Total Harmonic Distortion
SACD: 0.0008 % (1 kHz)
CD: 0.0015 % (1 kHz)

Headphone out
140 mW @ 600Ω
330 mW @ 250Ω
710 mW @ 100Ω

Power Consumption: 50 W

Standby Consumption: 0.3 W

Dimensions (WHD): 17.3″ x 5″ x 16.5″

Weight: 40.9 lbs.

Marantz PM-10 Specifications:

Speaker Terminals: Marantz SPKT-100+

Number of terminals: 4

Power Output (8/4 Ohm RMS): 200 W/400 W

Frequency Response: 5 Hz – 50 kHz

Total Harmonic Distortion: 0.005 %

Damping Factor: 500 dB

Input Sensitivity:
MM: 2.6 mV/47 kohm
MC:
280 μV/ 33 ohm (MC-LOW)
280 μV/ 133 ohm (MC-HIGH)

Signal to Noise Ratio:
MM: 88 dB
MC: 76 dB

Input Sensitivity:
High level: 440 mV/20 kohm
Balanced High level: 880 mV/40 kohm

Signal to Noise Ratio: 111 dB (2V input/rated output)

Input Sensitivity: 1.5 V/20 kohm

Signal to Noise Ratio: 113 d B

Power Consumption: 270 W

Standby Consumption: 0.3 W

Maximum Dimensions (WDH): 17.3″ x 17.8″ x 6.6″

Weight: 47.4 lbs.

  , , , , , , , , ,


Leave a Reply

Your email address will not be published. Required fields are marked *