Safe and Sound Logo
authorized dealer
Free UPS Ground Shipping
Free Lifetime Tech Support
Yamaha TTN503 Turntable with Ortofon 2M Red Phono Cartridge Bundle
Product ID: TT-N5032MRedBundle
Manufacturer: Yamaha
Product UPC Code: : 027108957876
Yamaha TTN503 Turntable with Ortofon 2M Red Phono Cartridge Bundle
List Price: $1,028.95
Price: $749.95

Earn 750 loyalty points
Add to cart
  • Description
  • Specifications
  • Reviews

Yamaha TT-N503 Turntable with Ortofon 2M Red Phono Cartridge Bundle


This Turntable Bundle consists of the following:

QTY: 1 Yamaha TT-N503 MusicCast Vinyl 500 Wi-Fi Turntable

QTY: 1 Ortofon 2m Red Moving Magnet Phono Cartridge

**Phono Cartridge comes professionally mounted and calibrated
Yamaha TT-N503 Turntable Specifications:

Network
  • File format: Mp3/WMA/MPEG-4 AAC: Up to 48kHZ/16-bit, ALAC: Up to 96kHz/24-bit, FLAC/WAV/AIFF: Up to 192kHz/24-bit, DSD: Up to 11.2MHz
  • Ethernet: Yes
  • Wi-Fi: Yes (2.4/5GHz)
  • AirPlay: Yes

Bluetooth
  • Version/profile: Version 4.2/A2DP, AVRCP
  • Audio codec: SBC, AAC
  • Maximum communication range: 10m/32.8 feet, 10 inches (without interference)

Turntable
  • Drive method: Belt drive
  • Motor: DC motor
  • Rotation speed: 33 1/3 RPM, 45 RPM
  • Rotation speed variation: ±2%
  • Wow and flutter: 0.2%
  • Platter: Aluminum diecast (diameter 30 cm)
  • Output level: 450mV (-7dBV, with RIAA EQ, 1kHz, 3.54cm/sec), 2.5mV ± 3dBV (without RIAA EQ, 1kHz, 3.54cm/sec)
  • Signal-to-noise ratio: 67dB or higher (A-weighted, 20kHz, LPF)

Tonearm
  • Tonearm: Static balance straight tonearm
  • Effective arm length: 223.5mm
  • Overhang: 19mm
  • Stylus pressure adjustment range: 0 - 4g
  • Acceptable cartridge weight: 15.5 - 19g (including headshell)

Attached Cartridge
  • Cartridge type: MM type
  • Output voltage: 2.5mV (1kHz, 3.54cm/sec)
  • Stylus pressure: 3.5 ± 0.5g
  • Cartridge weight: 5.0 ± 0.3g
  • Cartridge height: 17 ± 0.7mm
  • Headshell weight: 10g

Audio
  • Output terminal: RCA 2 (phono, line)
  • Output level: 2.0 ± 0.3V (1kHz, 0dB, Fs 44.1kHz)
  • Signal-to-noise ratio: IHF-A network 110dB or higher (Infinity zero, Fs 44.1kHz)
  • Dynamic range: 100dB or higher (1kHz, -60dB, Fs 44.1kHz)
  • Harmonic distortion: 0.003% or lower (1kHz, 0dB, Fs 44.1kHz)
  • Frequency response: Fs 44.1kHz; 2Hz to 20kHz (+0/-3dB), Fs 48kHz; 2Hz to 24kHz (+0/-3dB), Fs 96kHz; 2Hz to 48kHz (+0/-3dB), Fs 192kHz; 2Hz to 96kHz (+0/-6dB)

General
  • Power consumption: 6W
  • Eco-standby (reference date): 0.3W
  • Standby power consumption
    • Network standby ON, Bluetooth standby OFF, wired: 1.4W
    • Network standby ON, Bluetooth standby ON/OFF, Wi-Fi: 1.8W
    • Network standby ON, Bluetooth standby ON, wired: 1.6W
  • Dimensions (W x H x D): 17 3/4" x 5 3/8" x 14 1/2"
  • Weight: 12.6 lbs.

  • Ortofon 2M Red Specifications:

  • Designed with a heavier base construction to decrease vibration for superior performance
  • Tone arm action starts and stops automatically using gentle lifting and lowering motions to protect your vinyl
  • Moving-magnet (MM) cartridge headshell is removable
  • Turntable sheet is 5mm thick; uses hologram vibration analysis to improve its ability to hold a record
  • DC servo motor and belt drive system with rotation speeds of 33 1/3 or 45 rpm


  • Technical data

    Output voltage at 1000 Hz, 5cm/sec. - 5,5 mV
    Channel balance at 1 kHz - 1,5 dB
    Channel separation at 1 kHz - 22 dB
    Channel separation at 15 kHz - 15 dB
    Frequency range at - 3dB - 20-22.000 Hz
    Frequency response - 20-20.000 Hz + 3 / - 1 dB
    Tracking ability at 315Hz at recommended tracking force - 70 µm
    Compliance, dynamic, lateral - 20 µm/mN
    Stylus type - Elliptical
    Stylus tip radius - r/R 8/18 µm
    Tracking force range - 1,6-2,0g (16-20 mN)
    Tracking force, recommended - 1,8 g (18 mN)

    Tracking angle - 20°
    Internal impedance, DC resistance - 1,3 kOhm
    Internal inductance - 700 mH
    Recommended load resistance - 47 kOhm
    Recommended load capacitance - 150-300 pF
    Cartridge colour, body/stylus - Black/Red
    Cartridge weight - 7,2 g
    Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

    How to replace M2,0 mm screws on 2M Red Verso

    1. Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamond.
    2. Using Torx 8 key, unscrew the black screw from the Verso top plate.
    3. Remove the top plate from the cartridge body by pulling the screws off.
    4. Remove the two countersunk screws from the top plate.
    5. Insert the two M2,0 mm screws in the top plate.
    6. Mount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from above.
    7. Mount the black screw in the top plate and tighten with appropriate force.
    8. Mount the cartridge on the tonearm using the enclosed tool.
    9. Mount the stylus with the stylus protection guard on the cartridge body.

    2M Red accessories included the package:

    1 x Stylus brush
    1 x Screwdriver
    2 x Screw M2,5 x 5
    2 x Screw M2,5 x 7

    2M Red Verso accessories included the package:

    1 x Stylus brush
    1 x Allen key Torx 6
    1 x Allen key Torx 8
    2 x Screw M2,0 x 6

 
Product Reviews

No Reviews For This Product.

Click to review this product